Repairs and aftercare · KY16

Safety edge and photocell repairs in St Andrews

Before requesting a safety device repair in St Andrews, wipe the photocell lenses and check nothing is breaking the beam. If the door still misbehaves, we can visit homes in Fife, with the price confirmed in writing first.

Request a visit Call 0800 088 6248

Guide price: from £99 inc VAT
First step: Visit price agreed first
Covers: St Andrews, KY16
Area: Fife

Rubber safety edge on a roller door bottom rail and a photocell sensor on the guide rail

Computer-generated image

What should I know about safety edge and photocell repairs in St Andrews?

Photocells either side of the opening stop the door closing while anything is breaking the beam between them.
Photocells can often be added to doors that only have a safety edge, if the control box allows it.
The engineer tests the whole circuit, because a damaged cable or control box fault can look like a failed device.
Never tape over, bridge or bypass a safety device to make an electric roller door close.

How does it work in St Andrews?

The engineer tests the circuit and replaces the faulty device, then tests the door. Any further parts are quoted before they're fitted.

STEP 01
Tell us about the door
Describe the door and what you need, with a photo or video if you can.
STEP 02
Agree the visit price
We confirm the visit price before anyone comes out.
STEP 03
Visit
The engineer finds the cause and makes the door safe where possible.
STEP 04
Parts quoted first
Any parts are quoted before they are fitted, so you decide.

How much do safety edge and photocell repairs cost in St Andrews?

Item	Guide price (inc VAT)	Ex VAT
Photocell pair replacement, fitted	£99–£189	£82.50–£157.50 + VAT
Safety edge replacement, fitted	£159–£295	£132.50–£245.83 + VAT

Guide prices for homes, last reviewed 25 October 2026. Your written quote is the price. See the full price list.

Covering St Andrews and nearby

We take enquiries from across St Andrews, from KY16 outwards, and confirm every price and date in writing before anything is ordered. St Andrews lies around 31 miles from Dunfermline.

We also cover Dundee (11 miles), Carnoustie (12 miles) and Glenrothes (17 miles).

Rules that apply in St Andrews

Powered door safety

Every powered door we fit is commissioned with force testing to BS EN 12453 and handed over with a Declaration of Conformity and UKCA or CE marking, as the Supply of Machinery (Safety) Regulations 2008 require.

Electrics

An electric door needs a power supply near the roller box. Part P does not apply in Scotland, but electrical work must meet BS 7671 and the Scottish building standards where it forms part of building work.

Safety edge and photocell repairs in St Andrews: questions

What should I do while I wait for a visit in St Andrews?

If the door is stuck part-open, keep people, pets and cars clear of it and switch off the power at the isolator if it is safe to reach. Do not force the curtain or open the roller box. Your St Andrews visit date is confirmed in writing.

Do you repair roller doors you did not fit in St Andrews?

Yes. We repair roller garage doors of any make in St Andrews and across KY16, where parts are available. If a part is no longer made, we tell you what will fit instead, or price a replacement door if that is the better option.

Can I message you a photo of my garage in St Andrews?

Yes. Photos of the opening, the inside of the garage above the door and any existing door help us give a more useful guide price for St Andrews. Send them by WhatsApp or mention them in your enquiry, and we will reply in writing.

Do you cover St Andrews?

Yes. St Andrews is part of the area we cover in Fife, including KY16. Get a guide price online, then we confirm a survey or visit date in writing. Dates depend on installer and engineer availability.

Do you repair safety devices on any make of roller door?

Yes. We repair and replace safety edges and photocells on electric roller garage doors of any make, provided compatible parts are available for the control box. We don't work on sectional or up-and-over doors. If a compatible part isn't available, we'll explain the options before anything is booked.

How do I test my safety edge and photocells?

Follow the manufacturer's instructions for your door. In general, the test checks that the door stops or reverses when the safety edge meets an obstruction while closing, and that the door won't close while the photocell beam is broken. Keep people and pets clear while testing, and repeat the test monthly.