Repairs and aftercare · BS16

Safety edge and photocell repairs in Mangotsfield

For homes in Mangotsfield and elsewhere in Gloucestershire, we trace safety device faults through the whole circuit, from the device and its cable to the control box. Any parts beyond the ones agreed are quoted before they're fitted.

Request a visit Call 0800 088 6248

Guide price: from £99 inc VAT
First step: Visit price agreed first
Covers: Mangotsfield, BS16, BS15 and BS5
Area: Gloucestershire

Rubber safety edge on a roller door bottom rail and a photocell sensor on the guide rail

Computer-generated image

What should I know about safety edge and photocell repairs in Mangotsfield?

Photocells either side of the opening stop the door closing while anything is breaking the beam between them.
Wiping the photocell lenses and clearing the beam are safe checks to make before you request a visit.
A pressure-sensitive safety edge on the bottom rail stops or reverses the door when it touches something while closing.
Never tape over, bridge or bypass a safety device to make an electric roller door close.

How does it work in Mangotsfield?

Tell us what the roller door at your home in Mangotsfield is doing and what you've checked. Photos of the bottom rail, photocells and control box label help.

STEP 01
Tell us about the door
Describe the door and what you need, with a photo or video if you can.
STEP 02
Agree the visit price
We confirm the visit price before anyone comes out.
STEP 03
Visit
The engineer finds the cause and makes the door safe where possible.
STEP 04
Parts quoted first
Any parts are quoted before they are fitted, so you decide.

How much do safety edge and photocell repairs cost in Mangotsfield?

Item	Guide price (inc VAT)	Ex VAT
Photocell pair replacement, fitted	£99–£189	£82.50–£157.50 + VAT
Safety edge replacement, fitted	£159–£295	£132.50–£245.83 + VAT

Guide prices for homes, last reviewed 25 October 2026. Your written quote is the price. See the full price list.

Covering Mangotsfield and nearby

Our coverage in Gloucestershire includes Mangotsfield and the BS16, BS15 and BS5 postcode districts, so the same guide prices and written quotes apply here. For reference, Mangotsfield sits roughly 28 miles from Gloucester.

Nearby, we also take enquiries from Kingswood, Yate and Bath.

Rules that apply in Mangotsfield

Powered door safety

Every powered door we fit is commissioned with force testing to BS EN 12453 and handed over with a Declaration of Conformity and UKCA or CE marking, as the Supply of Machinery (Safety) Regulations 2008 require.

Electrics

An electric door needs a power supply near the roller box. Electrical work must meet BS 7671, and in England some domestic electrical work is notifiable under Part P, so it is done by a registered competent person or signed off by building control.

Safety edge and photocell repairs in Mangotsfield: questions

Can I get a price for Mangotsfield without anyone visiting?

Yes. The guide price tool takes four steps and gives a range for your opening and door type. It is a guide, not a quote: the written quote comes after the survey or once the visit price is agreed.

What should I do while I wait for a visit in Mangotsfield?

If the door is stuck part-open, keep people, pets and cars clear of it and switch off the power at the isolator if it is safe to reach. Do not force the curtain or open the roller box. Your Mangotsfield visit date is confirmed in writing.

Do you cover Mangotsfield?

Yes. Mangotsfield is part of the area we cover in Gloucestershire, including BS16, BS15 and BS5. Get a guide price online, then we confirm a survey or visit date in writing. Dates depend on installer and engineer availability.

Will you fix the door on the first visit?

A fault can sometimes be found and put right on the first visit, but we never promise it. If a part needs ordering, we quote for it first, make the door safe where we can, and confirm the return date in writing.

How do I test my safety edge and photocells?

Follow the manufacturer's instructions for your door. In general, the test checks that the door stops or reverses when the safety edge meets an obstruction while closing, and that the door won't close while the photocell beam is broken. Keep people and pets clear while testing, and repeat the test monthly.

Do you repair safety devices on any make of roller door?

Yes. We repair and replace safety edges and photocells on electric roller garage doors of any make, provided compatible parts are available for the control box. We don't work on sectional or up-and-over doors. If a compatible part isn't available, we'll explain the options before anything is booked.