Repairs and aftercare · SW2

Safety edge and photocell repairs in Brixton

We replace safety edges and photocell pairs on electric roller garage doors of any make in Brixton and across SW2 postcodes. After fitting, the door is tested to check it stops or reverses as it should.

Request a visit Call 0800 088 6248

Guide price: from £99 inc VAT
First step: Visit price agreed first
Covers: Brixton, SW2, SW9 and SW8
Area: Greater London

Rubber safety edge on a roller door bottom rail and a photocell sensor on the guide rail

Computer-generated image

What should I know about safety edge and photocell repairs in Brixton?

Wiping the photocell lenses and clearing the beam are safe checks to make before you request a visit.
Replacement safety edges and photocell pairs have fitted prices, agreed before the visit is booked.
Photocells either side of the opening stop the door closing while anything is breaking the beam between them.
After a repair, the door is tested to check it stops or reverses on obstruction before it's handed back.

How does it work in Brixton?

The engineer tests the circuit and replaces the faulty device, then tests the door. Any further parts are quoted before they're fitted.

STEP 01
Tell us about the door
Describe the door and what you need, with a photo or video if you can.
STEP 02
Agree the visit price
We confirm the visit price before anyone comes out.
STEP 03
Visit
The engineer finds the cause and makes the door safe where possible.
STEP 04
Parts quoted first
Any parts are quoted before they are fitted, so you decide.

How much do safety edge and photocell repairs cost in Brixton?

Item	Guide price (inc VAT)	Ex VAT
Photocell pair replacement, fitted	£99–£189	£82.50–£157.50 + VAT
Safety edge replacement, fitted	£159–£295	£132.50–£245.83 + VAT

Guide prices for homes, last reviewed 25 October 2026. Your written quote is the price. See the full price list.

Covering Brixton and nearby

We survey and fit roller garage doors across Brixton, including SW2, SW9 and SW8, as part of our coverage in Greater London. Brixton is about 2 miles from Westminster.

Looking from a neighbouring town? We also cover Peckham (2 miles) and Pimlico (2 miles).

Rules that apply in Brixton

Powered door safety

Every powered door we fit is commissioned with force testing to BS EN 12453 and handed over with a Declaration of Conformity and UKCA or CE marking, as the Supply of Machinery (Safety) Regulations 2008 require.

Electrics

An electric door needs a power supply near the roller box. Electrical work must meet BS 7671, and in England some domestic electrical work is notifiable under Part P, so it is done by a registered competent person or signed off by building control.

Safety edge and photocell repairs in Brixton: questions

How much is a visit in Brixton?

Prices for safety edge and photocell repairs start from £99 inc VAT, and the price is agreed before anyone comes out. Any parts not covered by that price are quoted before they are fitted, so you can decide on the spot. The guide prices are the same in Brixton as elsewhere we cover.

Can I message you a photo of my garage in Brixton?

Yes. Photos of the opening, the inside of the garage above the door and any existing door help us give a more useful guide price for Brixton. Send them by WhatsApp or mention them in your enquiry, and we will reply in writing.

Can I get a price for Brixton without anyone visiting?

Yes. The guide price tool takes four steps and gives a range for your opening and door type. It is a guide, not a quote: the written quote comes after the survey or once the visit price is agreed.

What should I do while I wait for a visit in Brixton?

If the door is stuck part-open, keep people, pets and cars clear of it and switch off the power at the isolator if it is safe to reach. Do not force the curtain or open the roller box. Your Brixton visit date is confirmed in writing.

Can photocells be added to a door that doesn't have them?

Often, if the control box has a connection for them. Some older systems need extra wiring or a replacement control box first. Tell us what's on the control box label and we'll confirm whether photocells can be added, and the price, before booking. Our battery backup and safety upgrades page covers adding devices.

Why does my roller door reverse when nothing is in the way?

A door that reverses on its own while closing is often reacting to a safety device that thinks there's an obstruction. Dirty or misaligned photocells, a damaged safety edge, a loose cable or limits that have drifted can all cause it. Clean the photocell lenses and check the beam is clear, then request a visit if it continues.