Repairs and aftercare · BR6

Safety edge and photocell repairs in Orpington

A split safety edge or knocked photocell on your roller door in Orpington is worth fixing before the door is used again, because those devices stop it closing onto people, pets and cars. Homes in the BR6 area get the price agreed before booking.

Request a visit Call 0800 088 6248

Guide price: from £99 inc VAT
First step: Visit price agreed first
Covers: Orpington, BR6, BR5 and BR7
Area: Greater London

Rubber safety edge on a roller door bottom rail and a photocell sensor on the guide rail

Computer-generated image

What should I know about safety edge and photocell repairs in Orpington?

The engineer tests the whole circuit, because a damaged cable or control box fault can look like a failed device.
Photocells either side of the opening stop the door closing while anything is breaking the beam between them.
A pressure-sensitive safety edge on the bottom rail stops or reverses the door when it touches something while closing.
After a repair, the door is tested to check it stops or reverses on obstruction before it's handed back.

How does it work in Orpington?

The engineer tests the circuit and replaces the faulty device, then tests the door. Any further parts are quoted before they're fitted.

STEP 01
Tell us about the door
Describe the door and what you need, with a photo or video if you can.
STEP 02
Agree the visit price
We confirm the visit price before anyone comes out.
STEP 03
Visit
The engineer finds the cause and makes the door safe where possible.
STEP 04
Parts quoted first
Any parts are quoted before they are fitted, so you decide.

How much do safety edge and photocell repairs cost in Orpington?

Item	Guide price (inc VAT)	Ex VAT
Photocell pair replacement, fitted	£99–£189	£82.50–£157.50 + VAT
Safety edge replacement, fitted	£159–£295	£132.50–£245.83 + VAT

Guide prices for homes, last reviewed 25 October 2026. Your written quote is the price. See the full price list.

Covering Orpington and nearby

Orpington is within the area we cover in Greater London. Homes in BR6, BR5 and BR7 get the same survey, quote and fitting process as everywhere else we work. Orpington is about 13 miles from Westminster.

Looking from a neighbouring town? We also cover Sidcup (4 miles) and Swanley (4 miles).

Rules that apply in Orpington

Powered door safety

Every powered door we fit is commissioned with force testing to BS EN 12453 and handed over with a Declaration of Conformity and UKCA or CE marking, as the Supply of Machinery (Safety) Regulations 2008 require.

Electrics

An electric door needs a power supply near the roller box. Electrical work must meet BS 7671, and in England some domestic electrical work is notifiable under Part P, so it is done by a registered competent person or signed off by building control.

Safety edge and photocell repairs in Orpington: questions

Do you charge more for Orpington than other towns in Greater London?

No. Guide prices are the same for Orpington as for anywhere else we cover in Greater London. The written quote reflects your opening and the door you choose, not your postcode, apart from islands and remote areas where any travel cost is shown in advance.

Will you fix the door on the first visit?

A fault can sometimes be found and put right on the first visit, but we never promise it. If a part needs ordering, we quote for it first, make the door safe where we can, and confirm the return date in writing.

Do you repair roller doors you did not fit in Orpington?

Yes. We repair roller garage doors of any make in Orpington and across BR6, BR5 and BR7, where parts are available. If a part is no longer made, we tell you what will fit instead, or price a replacement door if that is the better option.

Can I get a price for Orpington without anyone visiting?

Yes. The guide price tool takes four steps and gives a range for your opening and door type. It is a guide, not a quote: the written quote comes after the survey or once the visit price is agreed.

Do you repair safety devices on any make of roller door?

Yes. We repair and replace safety edges and photocells on electric roller garage doors of any make, provided compatible parts are available for the control box. We don't work on sectional or up-and-over doors. If a compatible part isn't available, we'll explain the options before anything is booked.

Can photocells be added to a door that doesn't have them?

Often, if the control box has a connection for them. Some older systems need extra wiring or a replacement control box first. Tell us what's on the control box label and we'll confirm whether photocells can be added, and the price, before booking. Our battery backup and safety upgrades page covers adding devices.