Repairs and aftercare · SW15

Safety edge and photocell repairs in Putney

Before requesting a safety device repair in Putney, wipe the photocell lenses and check nothing is breaking the beam. If the door still misbehaves, we can visit homes in Greater London, with the price confirmed in writing first.

Request a visit Call 0800 088 6248

Guide price: from £99 inc VAT
First step: Visit price agreed first
Covers: Putney, SW15, SW6 and SW18
Area: Greater London

Rubber safety edge on a roller door bottom rail and a photocell sensor on the guide rail

Computer-generated image

What should I know about safety edge and photocell repairs in Putney?

Photocells can often be added to doors that only have a safety edge, if the control box allows it.
A pressure-sensitive safety edge on the bottom rail stops or reverses the door when it touches something while closing.
The engineer tests the whole circuit, because a damaged cable or control box fault can look like a failed device.
Photocells either side of the opening stop the door closing while anything is breaking the beam between them.

How does it work in Putney?

We confirm the visit price and the likely part before anything is booked. The visit date depends on engineer availability and is confirmed in writing.

STEP 01
Tell us about the door
Describe the door and what you need, with a photo or video if you can.
STEP 02
Agree the visit price
We confirm the visit price before anyone comes out.
STEP 03
Visit
The engineer finds the cause and makes the door safe where possible.
STEP 04
Parts quoted first
Any parts are quoted before they are fitted, so you decide.

How much do safety edge and photocell repairs cost in Putney?

Item	Guide price (inc VAT)	Ex VAT
Photocell pair replacement, fitted	£99–£189	£82.50–£157.50 + VAT
Safety edge replacement, fitted	£159–£295	£132.50–£245.83 + VAT

Guide prices for homes, last reviewed 25 October 2026. Your written quote is the price. See the full price list.

Covering Putney and nearby

We take enquiries from across Putney, from SW15 outwards, and confirm every price and date in writing before anything is ordered. Putney lies around 4 miles from Westminster.

Other places close to Putney that we cover include Barnes, Fulham and Wimbledon.

Rules that apply in Putney

Powered door safety

Every powered door we fit is commissioned with force testing to BS EN 12453 and handed over with a Declaration of Conformity and UKCA or CE marking, as the Supply of Machinery (Safety) Regulations 2008 require.

Electrics

An electric door needs a power supply near the roller box. Electrical work must meet BS 7671, and in England some domestic electrical work is notifiable under Part P, so it is done by a registered competent person or signed off by building control.

Safety edge and photocell repairs in Putney: questions

Will you fix the door on the first visit?

A fault can sometimes be found and put right on the first visit, but we never promise it. If a part needs ordering, we quote for it first, make the door safe where we can, and confirm the return date in writing.

How much is a visit in Putney?

Prices for safety edge and photocell repairs start from £99 inc VAT, and the price is agreed before anyone comes out. Any parts not covered by that price are quoted before they are fitted, so you can decide on the spot. The guide prices are the same in Putney as elsewhere we cover.

Do you cover Putney?

Yes. Putney is part of the area we cover in Greater London, including SW15, SW6 and SW18. Get a guide price online, then we confirm a survey or visit date in writing. Dates depend on installer and engineer availability.

Can I message you a photo of my garage in Putney?

Yes. Photos of the opening, the inside of the garage above the door and any existing door help us give a more useful guide price for Putney. Send them by WhatsApp or mention them in your enquiry, and we will reply in writing.

How do I test my safety edge and photocells?

Follow the manufacturer's instructions for your door. In general, the test checks that the door stops or reverses when the safety edge meets an obstruction while closing, and that the door won't close while the photocell beam is broken. Keep people and pets clear while testing, and repeat the test monthly.

Why does my roller door reverse when nothing is in the way?

A door that reverses on its own while closing is often reacting to a safety device that thinks there's an obstruction. Dirty or misaligned photocells, a damaged safety edge, a loose cable or limits that have drifted can all cause it. Clean the photocell lenses and check the beam is clear, then request a visit if it continues.