Repairs and aftercare · M46

Safety edge and photocell repairs in Atherton

If the electric roller door on your garage in Atherton won't close, or reverses for no reason, the safety edge or photocells may be at fault. We repair and replace them for homes in Greater Manchester, with the visit price agreed before we come out.

Request a visit Call 0800 088 6248

Guide price: from £99 inc VAT
First step: Visit price agreed first
Covers: Atherton, M46, M29 and M38
Area: Greater Manchester

Rubber safety edge on a roller door bottom rail and a photocell sensor on the guide rail

Computer-generated image

What should I know about safety edge and photocell repairs in Atherton?

Replacement safety edges and photocell pairs have fitted prices, agreed before the visit is booked.
After a repair, the door is tested to check it stops or reverses on obstruction before it's handed back.
The engineer tests the whole circuit, because a damaged cable or control box fault can look like a failed device.
A pressure-sensitive safety edge on the bottom rail stops or reverses the door when it touches something while closing.

How does it work in Atherton?

We confirm the visit price and the likely part before anything is booked. The visit date depends on engineer availability and is confirmed in writing.

STEP 01
Tell us about the door
Describe the door and what you need, with a photo or video if you can.
STEP 02
Agree the visit price
We confirm the visit price before anyone comes out.
STEP 03
Visit
The engineer finds the cause and makes the door safe where possible.
STEP 04
Parts quoted first
Any parts are quoted before they are fitted, so you decide.

How much do safety edge and photocell repairs cost in Atherton?

Item	Guide price (inc VAT)	Ex VAT
Photocell pair replacement, fitted	£99–£189	£82.50–£157.50 + VAT
Safety edge replacement, fitted	£159–£295	£132.50–£245.83 + VAT

Guide prices for homes, last reviewed 25 October 2026. Your written quote is the price. See the full price list.

Covering Atherton and nearby

We survey and fit roller garage doors across Atherton, including M46, M29 and M38, as part of our coverage in Greater Manchester. Atherton lies around 11 miles from Manchester.

Other places close to Atherton that we cover include Tyldesley, Westhoughton and Leigh.

Rules that apply in Atherton

Powered door safety

Every powered door we fit is commissioned with force testing to BS EN 12453 and handed over with a Declaration of Conformity and UKCA or CE marking, as the Supply of Machinery (Safety) Regulations 2008 require.

Electrics

An electric door needs a power supply near the roller box. Electrical work must meet BS 7671, and in England some domestic electrical work is notifiable under Part P, so it is done by a registered competent person or signed off by building control.

Safety edge and photocell repairs in Atherton: questions

Do you cover Atherton?

Yes. Atherton is part of the area we cover in Greater Manchester, including M46, M29 and M38. Get a guide price online, then we confirm a survey or visit date in writing. Dates depend on installer and engineer availability.

Can I get a price for Atherton without anyone visiting?

Yes. The guide price tool takes four steps and gives a range for your opening and door type. It is a guide, not a quote: the written quote comes after the survey or once the visit price is agreed.

How much is a visit in Atherton?

Prices for safety edge and photocell repairs start from £99 inc VAT, and the price is agreed before anyone comes out. Any parts not covered by that price are quoted before they are fitted, so you can decide on the spot. The guide prices are the same in Atherton as elsewhere we cover.

What should I do while I wait for a visit in Atherton?

If the door is stuck part-open, keep people, pets and cars clear of it and switch off the power at the isolator if it is safe to reach. Do not force the curtain or open the roller box. Your Atherton visit date is confirmed in writing.

Do you repair safety devices on any make of roller door?

Yes. We repair and replace safety edges and photocells on electric roller garage doors of any make, provided compatible parts are available for the control box. We don't work on sectional or up-and-over doors. If a compatible part isn't available, we'll explain the options before anything is booked.

Why does my roller door reverse when nothing is in the way?

A door that reverses on its own while closing is often reacting to a safety device that thinks there's an obstruction. Dirty or misaligned photocells, a damaged safety edge, a loose cable or limits that have drifted can all cause it. Clean the photocell lenses and check the beam is clear, then request a visit if it continues.