Repairs and aftercare · SK14

Safety edge and photocell repairs in Hyde

Before requesting a safety device repair in Hyde, wipe the photocell lenses and check nothing is breaking the beam. If the door still misbehaves, we can visit homes in Greater Manchester, with the price confirmed in writing first.

Request a visit Call 0800 088 6248

Guide price: from £99 inc VAT
First step: Visit price agreed first
Covers: Hyde, SK14, SK16 and SK15
Area: Greater Manchester

Rubber safety edge on a roller door bottom rail and a photocell sensor on the guide rail

Computer-generated image

What should I know about safety edge and photocell repairs in Hyde?

Photocells can often be added to doors that only have a safety edge, if the control box allows it.
Never tape over, bridge or bypass a safety device to make an electric roller door close.
Photocells either side of the opening stop the door closing while anything is breaking the beam between them.
The engineer tests the whole circuit, because a damaged cable or control box fault can look like a failed device.

How does it work in Hyde?

The engineer tests the circuit and replaces the faulty device, then tests the door. Any further parts are quoted before they're fitted.

STEP 01
Tell us about the door
Describe the door and what you need, with a photo or video if you can.
STEP 02
Agree the visit price
We confirm the visit price before anyone comes out.
STEP 03
Visit
The engineer finds the cause and makes the door safe where possible.
STEP 04
Parts quoted first
Any parts are quoted before they are fitted, so you decide.

How much do safety edge and photocell repairs cost in Hyde?

Item	Guide price (inc VAT)	Ex VAT
Photocell pair replacement, fitted	£99–£189	£82.50–£157.50 + VAT
Safety edge replacement, fitted	£159–£295	£132.50–£245.83 + VAT

Guide prices for homes, last reviewed 25 October 2026. Your written quote is the price. See the full price list.

Covering Hyde and nearby

If your garage is in Hyde (SK14, SK16 and SK15), you can get a guide price online now, and we confirm any survey or visit date in writing. Hyde is about 7 miles from Manchester.

Other places close to Hyde that we cover include Denton, Dukinfield and Stalybridge.

Rules that apply in Hyde

Powered door safety

Every powered door we fit is commissioned with force testing to BS EN 12453 and handed over with a Declaration of Conformity and UKCA or CE marking, as the Supply of Machinery (Safety) Regulations 2008 require.

Electrics

An electric door needs a power supply near the roller box. Electrical work must meet BS 7671, and in England some domestic electrical work is notifiable under Part P, so it is done by a registered competent person or signed off by building control.

Safety edge and photocell repairs in Hyde: questions

Can I message you a photo of my garage in Hyde?

Yes. Photos of the opening, the inside of the garage above the door and any existing door help us give a more useful guide price for Hyde. Send them by WhatsApp or mention them in your enquiry, and we will reply in writing.

What should I do while I wait for a visit in Hyde?

If the door is stuck part-open, keep people, pets and cars clear of it and switch off the power at the isolator if it is safe to reach. Do not force the curtain or open the roller box. Your Hyde visit date is confirmed in writing.

Can I get a price for Hyde without anyone visiting?

Yes. The guide price tool takes four steps and gives a range for your opening and door type. It is a guide, not a quote: the written quote comes after the survey or once the visit price is agreed.

Will you fix the door on the first visit?

A fault can sometimes be found and put right on the first visit, but we never promise it. If a part needs ordering, we quote for it first, make the door safe where we can, and confirm the return date in writing.

Can I bypass the photocells to get the door shut?

No. Bypassing, bridging or taping over a safety device removes the protection that stops the door closing onto a person, pet or car. If the door won't close, switch it off at the isolator, keep the area clear and request a visit. Tell us if you're concerned about security when you get in touch.

How do I test my safety edge and photocells?

Follow the manufacturer's instructions for your door. In general, the test checks that the door stops or reverses when the safety edge meets an obstruction while closing, and that the door won't close while the photocell beam is broken. Keep people and pets clear while testing, and repeat the test monthly.