Repairs and aftercare · M24

Safety edge and photocell repairs in Middleton

If the electric roller door on your garage in Middleton won't close, or reverses for no reason, the safety edge or photocells may be at fault. We repair and replace them for homes in Greater Manchester, with the visit price agreed before we come out.

Request a visit Call 0800 088 6248

Guide price: from £99 inc VAT
First step: Visit price agreed first
Covers: Middleton, M24, M9 and OL9
Area: Greater Manchester

Rubber safety edge on a roller door bottom rail and a photocell sensor on the guide rail

Computer-generated image

What should I know about safety edge and photocell repairs in Middleton?

Wiping the photocell lenses and clearing the beam are safe checks to make before you request a visit.
Photocells can often be added to doors that only have a safety edge, if the control box allows it.
Photocells either side of the opening stop the door closing while anything is breaking the beam between them.
Never tape over, bridge or bypass a safety device to make an electric roller door close.

How does it work in Middleton?

Tell us what the roller door at your home in Middleton is doing and what you've checked. Photos of the bottom rail, photocells and control box label help.

STEP 01
Tell us about the door
Describe the door and what you need, with a photo or video if you can.
STEP 02
Agree the visit price
We confirm the visit price before anyone comes out.
STEP 03
Visit
The engineer finds the cause and makes the door safe where possible.
STEP 04
Parts quoted first
Any parts are quoted before they are fitted, so you decide.

How much do safety edge and photocell repairs cost in Middleton?

Item	Guide price (inc VAT)	Ex VAT
Photocell pair replacement, fitted	£99–£189	£82.50–£157.50 + VAT
Safety edge replacement, fitted	£159–£295	£132.50–£245.83 + VAT

Guide prices for homes, last reviewed 25 October 2026. Your written quote is the price. See the full price list.

Covering Middleton and nearby

We take enquiries from across Middleton, from M24 outwards, and confirm every price and date in writing before anything is ordered. Middleton is about 5 miles from Manchester.

Nearby, we also take enquiries from Chadderton, Heywood and Royton.

Rules that apply in Middleton

Powered door safety

Every powered door we fit is commissioned with force testing to BS EN 12453 and handed over with a Declaration of Conformity and UKCA or CE marking, as the Supply of Machinery (Safety) Regulations 2008 require.

Electrics

An electric door needs a power supply near the roller box. Electrical work must meet BS 7671, and in England some domestic electrical work is notifiable under Part P, so it is done by a registered competent person or signed off by building control.

Safety edge and photocell repairs in Middleton: questions

Will you fix the door on the first visit?

A fault can sometimes be found and put right on the first visit, but we never promise it. If a part needs ordering, we quote for it first, make the door safe where we can, and confirm the return date in writing.

What should I do while I wait for a visit in Middleton?

If the door is stuck part-open, keep people, pets and cars clear of it and switch off the power at the isolator if it is safe to reach. Do not force the curtain or open the roller box. Your Middleton visit date is confirmed in writing.

How much is a visit in Middleton?

Prices for safety edge and photocell repairs start from £99 inc VAT, and the price is agreed before anyone comes out. Any parts not covered by that price are quoted before they are fitted, so you can decide on the spot. The guide prices are the same in Middleton as elsewhere we cover.

Do you repair roller doors you did not fit in Middleton?

Yes. We repair roller garage doors of any make in Middleton and across M24, M9 and OL9, where parts are available. If a part is no longer made, we tell you what will fit instead, or price a replacement door if that is the better option.

Why does my roller door reverse when nothing is in the way?

A door that reverses on its own while closing is often reacting to a safety device that thinks there's an obstruction. Dirty or misaligned photocells, a damaged safety edge, a loose cable or limits that have drifted can all cause it. Clean the photocell lenses and check the beam is clear, then request a visit if it continues.

How do I test my safety edge and photocells?

Follow the manufacturer's instructions for your door. In general, the test checks that the door stops or reverses when the safety edge meets an obstruction while closing, and that the door won't close while the photocell beam is broken. Keep people and pets clear while testing, and repeat the test monthly.