Repairs and aftercare · AB56

Safety edge and photocell repairs in Buckie

A split safety edge or knocked photocell on your roller door in Buckie is worth fixing before the door is used again, because those devices stop it closing onto people, pets and cars. Homes in the AB56 area get the price agreed before booking.

Request a visit Call 0800 088 6248

Guide price: from £99 inc VAT
First step: Visit price agreed first
Covers: Buckie, AB56
Area: Highlands, Moray and Islands

Rubber safety edge on a roller door bottom rail and a photocell sensor on the guide rail

Computer-generated image

What should I know about safety edge and photocell repairs in Buckie?

Replacement safety edges and photocell pairs have fitted prices, agreed before the visit is booked.
The engineer tests the whole circuit, because a damaged cable or control box fault can look like a failed device.
A pressure-sensitive safety edge on the bottom rail stops or reverses the door when it touches something while closing.
Never tape over, bridge or bypass a safety device to make an electric roller door close.

How does it work in Buckie?

The engineer tests the circuit and replaces the faulty device, then tests the door. Any further parts are quoted before they're fitted.

STEP 01
Tell us about the door
Describe the door and what you need, with a photo or video if you can.
STEP 02
Agree the visit price
We confirm the visit price before anyone comes out.
STEP 03
Visit
The engineer finds the cause and makes the door safe where possible.
STEP 04
Parts quoted first
Any parts are quoted before they are fitted, so you decide.

How much do safety edge and photocell repairs cost in Buckie?

Item	Guide price (inc VAT)	Ex VAT
Photocell pair replacement, fitted	£99–£189	£82.50–£157.50 + VAT
Safety edge replacement, fitted	£159–£295	£132.50–£245.83 + VAT

Guide prices for homes, last reviewed 25 October 2026. Your written quote is the price. See the full price list.

Covering Buckie and nearby

We survey and fit roller garage doors across Buckie, including AB56, as part of our coverage in the Highlands, Moray and Islands. Buckie lies around 49 miles from Inverness.

Rules that apply in Buckie

Powered door safety

Every powered door we fit is commissioned with force testing to BS EN 12453 and handed over with a Declaration of Conformity and UKCA or CE marking, as the Supply of Machinery (Safety) Regulations 2008 require.

Electrics

An electric door needs a power supply near the roller box. Part P does not apply in Scotland, but electrical work must meet BS 7671 and the Scottish building standards where it forms part of building work.

Safety edge and photocell repairs in Buckie: questions

Can I get a price for Buckie without anyone visiting?

Yes. The guide price tool takes four steps and gives a range for your opening and door type. It is a guide, not a quote: the written quote comes after the survey or once the visit price is agreed.

Do you charge more for Buckie than other towns in the Highlands, Moray and Islands?

No. Guide prices are the same for Buckie as for anywhere else we cover in the Highlands, Moray and Islands. The written quote reflects your opening and the door you choose, not your postcode, apart from islands and remote areas where any travel cost is shown in advance.

Will you fix the door on the first visit?

A fault can sometimes be found and put right on the first visit, but we never promise it. If a part needs ordering, we quote for it first, make the door safe where we can, and confirm the return date in writing.

What should I do while I wait for a visit in Buckie?

If the door is stuck part-open, keep people, pets and cars clear of it and switch off the power at the isolator if it is safe to reach. Do not force the curtain or open the roller box. Your Buckie visit date is confirmed in writing.

Why does my roller door reverse when nothing is in the way?

A door that reverses on its own while closing is often reacting to a safety device that thinks there's an obstruction. Dirty or misaligned photocells, a damaged safety edge, a loose cable or limits that have drifted can all cause it. Clean the photocell lenses and check the beam is clear, then request a visit if it continues.

Can I bypass the photocells to get the door shut?

No. Bypassing, bridging or taping over a safety device removes the protection that stops the door closing onto a person, pet or car. If the door won't close, switch it off at the isolator, keep the area clear and request a visit. Tell us if you're concerned about security when you get in touch.