Repairs and aftercare · CT9

Safety edge and photocell repairs in Margate

Before requesting a safety device repair in Margate, wipe the photocell lenses and check nothing is breaking the beam. If the door still misbehaves, we can visit homes in Kent, with the price confirmed in writing first.

Request a visit Call 0800 088 6248

Guide price: from £99 inc VAT
First step: Visit price agreed first
Covers: Margate, CT9, CT8 and CT10
Area: Kent

Rubber safety edge on a roller door bottom rail and a photocell sensor on the guide rail

Computer-generated image

What should I know about safety edge and photocell repairs in Margate?

The engineer tests the whole circuit, because a damaged cable or control box fault can look like a failed device.
Never tape over, bridge or bypass a safety device to make an electric roller door close.
A pressure-sensitive safety edge on the bottom rail stops or reverses the door when it touches something while closing.
Photocells either side of the opening stop the door closing while anything is breaking the beam between them.

How does it work in Margate?

The engineer tests the circuit and replaces the faulty device, then tests the door. Any further parts are quoted before they're fitted.

STEP 01
Tell us about the door
Describe the door and what you need, with a photo or video if you can.
STEP 02
Agree the visit price
We confirm the visit price before anyone comes out.
STEP 03
Visit
The engineer finds the cause and makes the door safe where possible.
STEP 04
Parts quoted first
Any parts are quoted before they are fitted, so you decide.

How much do safety edge and photocell repairs cost in Margate?

Item	Guide price (inc VAT)	Ex VAT
Photocell pair replacement, fitted	£99–£189	£82.50–£157.50 + VAT
Safety edge replacement, fitted	£159–£295	£132.50–£245.83 + VAT

Guide prices for homes, last reviewed 25 October 2026. Your written quote is the price. See the full price list.

Covering Margate and nearby

We survey and fit roller garage doors across Margate, including CT9, CT8 and CT10, as part of our coverage in Kent. Margate lies around 38 miles from Maidstone.

Looking from a neighbouring town? We also cover Broadstairs (3 miles) and Ramsgate (3 miles).

Rules that apply in Margate

Powered door safety

Every powered door we fit is commissioned with force testing to BS EN 12453 and handed over with a Declaration of Conformity and UKCA or CE marking, as the Supply of Machinery (Safety) Regulations 2008 require.

Electrics

An electric door needs a power supply near the roller box. Electrical work must meet BS 7671, and in England some domestic electrical work is notifiable under Part P, so it is done by a registered competent person or signed off by building control.

Safety edge and photocell repairs in Margate: questions

What should I do while I wait for a visit in Margate?

If the door is stuck part-open, keep people, pets and cars clear of it and switch off the power at the isolator if it is safe to reach. Do not force the curtain or open the roller box. Your Margate visit date is confirmed in writing.

Do you repair roller doors you did not fit in Margate?

Yes. We repair roller garage doors of any make in Margate and across CT9, CT8 and CT10, where parts are available. If a part is no longer made, we tell you what will fit instead, or price a replacement door if that is the better option.

How much is a visit in Margate?

Prices for safety edge and photocell repairs start from £99 inc VAT, and the price is agreed before anyone comes out. Any parts not covered by that price are quoted before they are fitted, so you can decide on the spot. The guide prices are the same in Margate as elsewhere we cover.

Do you cover Margate?

Yes. Margate is part of the area we cover in Kent, including CT9, CT8 and CT10. Get a guide price online, then we confirm a survey or visit date in writing. Dates depend on installer and engineer availability.

Can photocells be added to a door that doesn't have them?

Often, if the control box has a connection for them. Some older systems need extra wiring or a replacement control box first. Tell us what's on the control box label and we'll confirm whether photocells can be added, and the price, before booking. Our battery backup and safety upgrades page covers adding devices.

Can I bypass the photocells to get the door shut?

No. Bypassing, bridging or taping over a safety device removes the protection that stops the door closing onto a person, pet or car. If the door won't close, switch it off at the isolator, keep the area clear and request a visit. Tell us if you're concerned about security when you get in touch.