Repairs and aftercare · ME1

Safety edge and photocell repairs in Rochester

We replace safety edges and photocell pairs on electric roller garage doors of any make in Rochester and across ME1 postcodes. After fitting, the door is tested to check it stops or reverses as it should.

Request a visit Call 0800 088 6248

Guide price: from £99 inc VAT
First step: Visit price agreed first
Covers: Rochester, ME1, ME2 and ME4
Area: Kent

Rubber safety edge on a roller door bottom rail and a photocell sensor on the guide rail

Computer-generated image

What should I know about safety edge and photocell repairs in Rochester?

Never tape over, bridge or bypass a safety device to make an electric roller door close.
After a repair, the door is tested to check it stops or reverses on obstruction before it's handed back.
Photocells can often be added to doors that only have a safety edge, if the control box allows it.
A pressure-sensitive safety edge on the bottom rail stops or reverses the door when it touches something while closing.

How does it work in Rochester?

Tell us what the roller door at your home in Rochester is doing and what you've checked. Photos of the bottom rail, photocells and control box label help.

STEP 01
Tell us about the door
Describe the door and what you need, with a photo or video if you can.
STEP 02
Agree the visit price
We confirm the visit price before anyone comes out.
STEP 03
Visit
The engineer finds the cause and makes the door safe where possible.
STEP 04
Parts quoted first
Any parts are quoted before they are fitted, so you decide.

How much do safety edge and photocell repairs cost in Rochester?

Item	Guide price (inc VAT)	Ex VAT
Photocell pair replacement, fitted	£99–£189	£82.50–£157.50 + VAT
Safety edge replacement, fitted	£159–£295	£132.50–£245.83 + VAT

Guide prices for homes, last reviewed 25 October 2026. Your written quote is the price. See the full price list.

Covering Rochester and nearby

We take enquiries from across Rochester, from ME1 outwards, and confirm every price and date in writing before anything is ordered. Rochester lies around 8 miles from Maidstone.

Nearby, we also take enquiries from Chatham, Strood and Gillingham.

Rules that apply in Rochester

Powered door safety

Every powered door we fit is commissioned with force testing to BS EN 12453 and handed over with a Declaration of Conformity and UKCA or CE marking, as the Supply of Machinery (Safety) Regulations 2008 require.

Electrics

An electric door needs a power supply near the roller box. Electrical work must meet BS 7671, and in England some domestic electrical work is notifiable under Part P, so it is done by a registered competent person or signed off by building control.

Safety edge and photocell repairs in Rochester: questions

Can I get a price for Rochester without anyone visiting?

Yes. The guide price tool takes four steps and gives a range for your opening and door type. It is a guide, not a quote: the written quote comes after the survey or once the visit price is agreed.

How much is a visit in Rochester?

Prices for safety edge and photocell repairs start from £99 inc VAT, and the price is agreed before anyone comes out. Any parts not covered by that price are quoted before they are fitted, so you can decide on the spot. The guide prices are the same in Rochester as elsewhere we cover.

Do you charge more for Rochester than other towns in Kent?

No. Guide prices are the same for Rochester as for anywhere else we cover in Kent. The written quote reflects your opening and the door you choose, not your postcode, apart from islands and remote areas where any travel cost is shown in advance.

Do you repair roller doors you did not fit in Rochester?

Yes. We repair roller garage doors of any make in Rochester and across ME1, ME2 and ME4, where parts are available. If a part is no longer made, we tell you what will fit instead, or price a replacement door if that is the better option.

How do I test my safety edge and photocells?

Follow the manufacturer's instructions for your door. In general, the test checks that the door stops or reverses when the safety edge meets an obstruction while closing, and that the door won't close while the photocell beam is broken. Keep people and pets clear while testing, and repeat the test monthly.

Why does my roller door reverse when nothing is in the way?

A door that reverses on its own while closing is often reacting to a safety device that thinks there's an obstruction. Dirty or misaligned photocells, a damaged safety edge, a loose cable or limits that have drifted can all cause it. Clean the photocell lenses and check the beam is clear, then request a visit if it continues.