Repairs and aftercare · LE12

Safety edge and photocell repairs in Loughborough

We replace safety edges and photocell pairs on electric roller garage doors of any make in Loughborough and across LE12 postcodes. After fitting, the door is tested to check it stops or reverses as it should.

Request a visit Call 0800 088 6248

Guide price: from £99 inc VAT
First step: Visit price agreed first
Covers: Loughborough, LE12 and LE11
Area: Leicestershire

Rubber safety edge on a roller door bottom rail and a photocell sensor on the guide rail

Computer-generated image

What should I know about safety edge and photocell repairs in Loughborough?

Wiping the photocell lenses and clearing the beam are safe checks to make before you request a visit.
The engineer tests the whole circuit, because a damaged cable or control box fault can look like a failed device.
Photocells either side of the opening stop the door closing while anything is breaking the beam between them.
A pressure-sensitive safety edge on the bottom rail stops or reverses the door when it touches something while closing.

How does it work in Loughborough?

We confirm the visit price and the likely part before anything is booked. The visit date depends on engineer availability and is confirmed in writing.

STEP 01
Tell us about the door
Describe the door and what you need, with a photo or video if you can.
STEP 02
Agree the visit price
We confirm the visit price before anyone comes out.
STEP 03
Visit
The engineer finds the cause and makes the door safe where possible.
STEP 04
Parts quoted first
Any parts are quoted before they are fitted, so you decide.

How much do safety edge and photocell repairs cost in Loughborough?

Item	Guide price (inc VAT)	Ex VAT
Photocell pair replacement, fitted	£99–£189	£82.50–£157.50 + VAT
Safety edge replacement, fitted	£159–£295	£132.50–£245.83 + VAT

Guide prices for homes, last reviewed 25 October 2026. Your written quote is the price. See the full price list.

Covering Loughborough and nearby

Loughborough is within the area we cover in Leicestershire. Homes in LE12 and LE11 get the same survey, quote and fitting process as everywhere else we work. For reference, Loughborough sits roughly 9 miles from Leicester.

Looking from a neighbouring town? We also cover Coalville (8 miles) and Leicester (9 miles).

Rules that apply in Loughborough

Powered door safety

Every powered door we fit is commissioned with force testing to BS EN 12453 and handed over with a Declaration of Conformity and UKCA or CE marking, as the Supply of Machinery (Safety) Regulations 2008 require.

Electrics

An electric door needs a power supply near the roller box. Electrical work must meet BS 7671, and in England some domestic electrical work is notifiable under Part P, so it is done by a registered competent person or signed off by building control.

Safety edge and photocell repairs in Loughborough: questions

How much is a visit in Loughborough?

Prices for safety edge and photocell repairs start from £99 inc VAT, and the price is agreed before anyone comes out. Any parts not covered by that price are quoted before they are fitted, so you can decide on the spot. The guide prices are the same in Loughborough as elsewhere we cover.

Can I get a price for Loughborough without anyone visiting?

Yes. The guide price tool takes four steps and gives a range for your opening and door type. It is a guide, not a quote: the written quote comes after the survey or once the visit price is agreed.

Can I message you a photo of my garage in Loughborough?

Yes. Photos of the opening, the inside of the garage above the door and any existing door help us give a more useful guide price for Loughborough. Send them by WhatsApp or mention them in your enquiry, and we will reply in writing.

Do you cover Loughborough?

Yes. Loughborough is part of the area we cover in Leicestershire, including LE12 and LE11. Get a guide price online, then we confirm a survey or visit date in writing. Dates depend on installer and engineer availability.

Can I bypass the photocells to get the door shut?

No. Bypassing, bridging or taping over a safety device removes the protection that stops the door closing onto a person, pet or car. If the door won't close, switch it off at the isolator, keep the area clear and request a visit. Tell us if you're concerned about security when you get in touch.

Why does my roller door reverse when nothing is in the way?

A door that reverses on its own while closing is often reacting to a safety device that thinks there's an obstruction. Dirty or misaligned photocells, a damaged safety edge, a loose cable or limits that have drifted can all cause it. Clean the photocell lenses and check the beam is clear, then request a visit if it continues.