Repairs and aftercare · CF42

Safety edge and photocell repairs in Rhondda

If the electric roller door on your garage in Rhondda won't close, or reverses for no reason, the safety edge or photocells may be at fault. We repair and replace them for homes in Mid Glamorgan, with the visit price agreed before we come out.

Request a visit Call 0800 088 6248

Guide price: from £99 inc VAT
First step: Visit price agreed first
Covers: Rhondda, CF42, CF43 and CF41
Area: Mid Glamorgan

Rubber safety edge on a roller door bottom rail and a photocell sensor on the guide rail

Computer-generated image

What should I know about safety edge and photocell repairs in Rhondda?

The engineer tests the whole circuit, because a damaged cable or control box fault can look like a failed device.
Wiping the photocell lenses and clearing the beam are safe checks to make before you request a visit.
Never tape over, bridge or bypass a safety device to make an electric roller door close.
Photocells can often be added to doors that only have a safety edge, if the control box allows it.

How does it work in Rhondda?

The engineer tests the circuit and replaces the faulty device, then tests the door. Any further parts are quoted before they're fitted.

STEP 01
Tell us about the door
Describe the door and what you need, with a photo or video if you can.
STEP 02
Agree the visit price
We confirm the visit price before anyone comes out.
STEP 03
Visit
The engineer finds the cause and makes the door safe where possible.
STEP 04
Parts quoted first
Any parts are quoted before they are fitted, so you decide.

How much do safety edge and photocell repairs cost in Rhondda?

Item	Guide price (inc VAT)	Ex VAT
Photocell pair replacement, fitted	£99–£189	£82.50–£157.50 + VAT
Safety edge replacement, fitted	£159–£295	£132.50–£245.83 + VAT

Guide prices for homes, last reviewed 25 October 2026. Your written quote is the price. See the full price list.

Covering Rhondda and nearby

We take enquiries from across Rhondda, from CF42 outwards, and confirm every price and date in writing before anything is ordered. Rhondda is about 12 miles from Bridgend.

Other places close to Rhondda that we cover include Tonypandy, Aberdare and Pontypridd.

Rules that apply in Rhondda

Powered door safety

Every powered door we fit is commissioned with force testing to BS EN 12453 and handed over with a Declaration of Conformity and UKCA or CE marking, as the Supply of Machinery (Safety) Regulations 2008 require.

Electrics

An electric door needs a power supply near the roller box. Electrical work must meet BS 7671, and in Wales some domestic electrical work is notifiable under Part P, so it is done by a registered competent person or signed off by building control.

Safety edge and photocell repairs in Rhondda: questions

What should I do while I wait for a visit in Rhondda?

If the door is stuck part-open, keep people, pets and cars clear of it and switch off the power at the isolator if it is safe to reach. Do not force the curtain or open the roller box. Your Rhondda visit date is confirmed in writing.

Can I get a price for Rhondda without anyone visiting?

Yes. The guide price tool takes four steps and gives a range for your opening and door type. It is a guide, not a quote: the written quote comes after the survey or once the visit price is agreed.

Do you charge more for Rhondda than other towns in Mid Glamorgan?

No. Guide prices are the same for Rhondda as for anywhere else we cover in Mid Glamorgan. The written quote reflects your opening and the door you choose, not your postcode, apart from islands and remote areas where any travel cost is shown in advance.

Can I message you a photo of my garage in Rhondda?

Yes. Photos of the opening, the inside of the garage above the door and any existing door help us give a more useful guide price for Rhondda. Send them by WhatsApp or mention them in your enquiry, and we will reply in writing.

How do I test my safety edge and photocells?

Follow the manufacturer's instructions for your door. In general, the test checks that the door stops or reverses when the safety edge meets an obstruction while closing, and that the door won't close while the photocell beam is broken. Keep people and pets clear while testing, and repeat the test monthly.

Can I bypass the photocells to get the door shut?

No. Bypassing, bridging or taping over a safety device removes the protection that stops the door closing onto a person, pet or car. If the door won't close, switch it off at the isolator, keep the area clear and request a visit. Tell us if you're concerned about security when you get in touch.