Repairs and aftercare · TS1

Safety edge and photocell repairs in Middlesbrough

If the electric roller door on your garage in Middlesbrough won't close, or reverses for no reason, the safety edge or photocells may be at fault. We repair and replace them for homes in North Yorkshire, with the visit price agreed before we come out.

Request a visit Call 0800 088 6248

Guide price: from £99 inc VAT
First step: Visit price agreed first
Covers: Middlesbrough, TS1, TS2 and TS4
Area: North Yorkshire

Rubber safety edge on a roller door bottom rail and a photocell sensor on the guide rail

Computer-generated image

What should I know about safety edge and photocell repairs in Middlesbrough?

The engineer tests the whole circuit, because a damaged cable or control box fault can look like a failed device.
Photocells can often be added to doors that only have a safety edge, if the control box allows it.
A pressure-sensitive safety edge on the bottom rail stops or reverses the door when it touches something while closing.
Wiping the photocell lenses and clearing the beam are safe checks to make before you request a visit.

How does it work in Middlesbrough?

Tell us what the roller door at your home in Middlesbrough is doing and what you've checked. Photos of the bottom rail, photocells and control box label help.

STEP 01
Tell us about the door
Describe the door and what you need, with a photo or video if you can.
STEP 02
Agree the visit price
We confirm the visit price before anyone comes out.
STEP 03
Visit
The engineer finds the cause and makes the door safe where possible.
STEP 04
Parts quoted first
Any parts are quoted before they are fitted, so you decide.

How much do safety edge and photocell repairs cost in Middlesbrough?

Item	Guide price (inc VAT)	Ex VAT
Photocell pair replacement, fitted	£99–£189	£82.50–£157.50 + VAT
Safety edge replacement, fitted	£159–£295	£132.50–£245.83 + VAT

Guide prices for homes, last reviewed 25 October 2026. Your written quote is the price. See the full price list.

Covering Middlesbrough and nearby

We survey and fit roller garage doors across Middlesbrough, including TS1, TS2 and TS4, as part of our coverage in North Yorkshire. Middlesbrough is about 43 miles from York.

Nearby, we also take enquiries from Billingham, Stockton-on-Tees and Thornaby-on-Tees.

Rules that apply in Middlesbrough

Powered door safety

Every powered door we fit is commissioned with force testing to BS EN 12453 and handed over with a Declaration of Conformity and UKCA or CE marking, as the Supply of Machinery (Safety) Regulations 2008 require.

Electrics

An electric door needs a power supply near the roller box. Electrical work must meet BS 7671, and in England some domestic electrical work is notifiable under Part P, so it is done by a registered competent person or signed off by building control.

Safety edge and photocell repairs in Middlesbrough: questions

Do you cover Middlesbrough?

Yes. Middlesbrough is part of the area we cover in North Yorkshire, including TS1, TS2 and TS4. Get a guide price online, then we confirm a survey or visit date in writing. Dates depend on installer and engineer availability.

Will you fix the door on the first visit?

A fault can sometimes be found and put right on the first visit, but we never promise it. If a part needs ordering, we quote for it first, make the door safe where we can, and confirm the return date in writing.

Do you repair roller doors you did not fit in Middlesbrough?

Yes. We repair roller garage doors of any make in Middlesbrough and across TS1, TS2 and TS4, where parts are available. If a part is no longer made, we tell you what will fit instead, or price a replacement door if that is the better option.

How much is a visit in Middlesbrough?

Prices for safety edge and photocell repairs start from £99 inc VAT, and the price is agreed before anyone comes out. Any parts not covered by that price are quoted before they are fitted, so you can decide on the spot. The guide prices are the same in Middlesbrough as elsewhere we cover.

Why does my roller door reverse when nothing is in the way?

A door that reverses on its own while closing is often reacting to a safety device that thinks there's an obstruction. Dirty or misaligned photocells, a damaged safety edge, a loose cable or limits that have drifted can all cause it. Clean the photocell lenses and check the beam is clear, then request a visit if it continues.

Do you repair safety devices on any make of roller door?

Yes. We repair and replace safety edges and photocells on electric roller garage doors of any make, provided compatible parts are available for the control box. We don't work on sectional or up-and-over doors. If a compatible part isn't available, we'll explain the options before anything is booked.