Repairs and aftercare · NN11

Safety edge and photocell repairs in Daventry

We replace safety edges and photocell pairs on electric roller garage doors of any make in Daventry and across NN11 postcodes. After fitting, the door is tested to check it stops or reverses as it should.

Request a visit Call 0800 088 6248

Guide price: from £99 inc VAT
First step: Visit price agreed first
Covers: Daventry, NN11
Area: Northamptonshire

Rubber safety edge on a roller door bottom rail and a photocell sensor on the guide rail

Computer-generated image

What should I know about safety edge and photocell repairs in Daventry?

The engineer tests the whole circuit, because a damaged cable or control box fault can look like a failed device.
Photocells either side of the opening stop the door closing while anything is breaking the beam between them.
A pressure-sensitive safety edge on the bottom rail stops or reverses the door when it touches something while closing.
Never tape over, bridge or bypass a safety device to make an electric roller door close.

How does it work in Daventry?

We confirm the visit price and the likely part before anything is booked. The visit date depends on engineer availability and is confirmed in writing.

STEP 01
Tell us about the door
Describe the door and what you need, with a photo or video if you can.
STEP 02
Agree the visit price
We confirm the visit price before anyone comes out.
STEP 03
Visit
The engineer finds the cause and makes the door safe where possible.
STEP 04
Parts quoted first
Any parts are quoted before they are fitted, so you decide.

How much do safety edge and photocell repairs cost in Daventry?

Item	Guide price (inc VAT)	Ex VAT
Photocell pair replacement, fitted	£99–£189	£82.50–£157.50 + VAT
Safety edge replacement, fitted	£159–£295	£132.50–£245.83 + VAT

Guide prices for homes, last reviewed 25 October 2026. Your written quote is the price. See the full price list.

Covering Daventry and nearby

Daventry is within the area we cover in Northamptonshire. Homes in NN11 get the same survey, quote and fitting process as everywhere else we work. For reference, Daventry sits roughly 12 miles from Northampton.

Looking from a neighbouring town? We also cover Rugby (9 miles) and Northampton (12 miles).

Rules that apply in Daventry

Powered door safety

Every powered door we fit is commissioned with force testing to BS EN 12453 and handed over with a Declaration of Conformity and UKCA or CE marking, as the Supply of Machinery (Safety) Regulations 2008 require.

Electrics

An electric door needs a power supply near the roller box. Electrical work must meet BS 7671, and in England some domestic electrical work is notifiable under Part P, so it is done by a registered competent person or signed off by building control.

Safety edge and photocell repairs in Daventry: questions

Will you fix the door on the first visit?

A fault can sometimes be found and put right on the first visit, but we never promise it. If a part needs ordering, we quote for it first, make the door safe where we can, and confirm the return date in writing.

What should I do while I wait for a visit in Daventry?

If the door is stuck part-open, keep people, pets and cars clear of it and switch off the power at the isolator if it is safe to reach. Do not force the curtain or open the roller box. Your Daventry visit date is confirmed in writing.

How much is a visit in Daventry?

Prices for safety edge and photocell repairs start from £99 inc VAT, and the price is agreed before anyone comes out. Any parts not covered by that price are quoted before they are fitted, so you can decide on the spot. The guide prices are the same in Daventry as elsewhere we cover.

Can I get a price for Daventry without anyone visiting?

Yes. The guide price tool takes four steps and gives a range for your opening and door type. It is a guide, not a quote: the written quote comes after the survey or once the visit price is agreed.

How do I test my safety edge and photocells?

Follow the manufacturer's instructions for your door. In general, the test checks that the door stops or reverses when the safety edge meets an obstruction while closing, and that the door won't close while the photocell beam is broken. Keep people and pets clear while testing, and repeat the test monthly.

Why does my roller door reverse when nothing is in the way?

A door that reverses on its own while closing is often reacting to a safety device that thinks there's an obstruction. Dirty or misaligned photocells, a damaged safety edge, a loose cable or limits that have drifted can all cause it. Clean the photocell lenses and check the beam is clear, then request a visit if it continues.