Repairs and aftercare · NN8

Safety edge and photocell repairs in Wellingborough

We replace safety edges and photocell pairs on electric roller garage doors of any make in Wellingborough and across NN8 postcodes. After fitting, the door is tested to check it stops or reverses as it should.

Request a visit Call 0800 088 6248

Guide price: from £99 inc VAT
First step: Visit price agreed first
Covers: Wellingborough, NN8
Area: Northamptonshire

Rubber safety edge on a roller door bottom rail and a photocell sensor on the guide rail

Computer-generated image

What should I know about safety edge and photocell repairs in Wellingborough?

A pressure-sensitive safety edge on the bottom rail stops or reverses the door when it touches something while closing.
Photocells either side of the opening stop the door closing while anything is breaking the beam between them.
The engineer tests the whole circuit, because a damaged cable or control box fault can look like a failed device.
Photocells can often be added to doors that only have a safety edge, if the control box allows it.

How does it work in Wellingborough?

We confirm the visit price and the likely part before anything is booked. The visit date depends on engineer availability and is confirmed in writing.

STEP 01
Tell us about the door
Describe the door and what you need, with a photo or video if you can.
STEP 02
Agree the visit price
We confirm the visit price before anyone comes out.
STEP 03
Visit
The engineer finds the cause and makes the door safe where possible.
STEP 04
Parts quoted first
Any parts are quoted before they are fitted, so you decide.

How much do safety edge and photocell repairs cost in Wellingborough?

Item	Guide price (inc VAT)	Ex VAT
Photocell pair replacement, fitted	£99–£189	£82.50–£157.50 + VAT
Safety edge replacement, fitted	£159–£295	£132.50–£245.83 + VAT

Guide prices for homes, last reviewed 25 October 2026. Your written quote is the price. See the full price list.

Covering Wellingborough and nearby

We survey and fit roller garage doors across Wellingborough, including NN8, as part of our coverage in Northamptonshire. Wellingborough is about 9 miles from Northampton.

Other places close to Wellingborough that we cover include Rushden, Kettering and Northampton.

Rules that apply in Wellingborough

Powered door safety

Every powered door we fit is commissioned with force testing to BS EN 12453 and handed over with a Declaration of Conformity and UKCA or CE marking, as the Supply of Machinery (Safety) Regulations 2008 require.

Electrics

An electric door needs a power supply near the roller box. Electrical work must meet BS 7671, and in England some domestic electrical work is notifiable under Part P, so it is done by a registered competent person or signed off by building control.

Safety edge and photocell repairs in Wellingborough: questions

Can I message you a photo of my garage in Wellingborough?

Yes. Photos of the opening, the inside of the garage above the door and any existing door help us give a more useful guide price for Wellingborough. Send them by WhatsApp or mention them in your enquiry, and we will reply in writing.

Do you cover Wellingborough?

Yes. Wellingborough is part of the area we cover in Northamptonshire, including NN8. Get a guide price online, then we confirm a survey or visit date in writing. Dates depend on installer and engineer availability.

How much is a visit in Wellingborough?

Prices for safety edge and photocell repairs start from £99 inc VAT, and the price is agreed before anyone comes out. Any parts not covered by that price are quoted before they are fitted, so you can decide on the spot. The guide prices are the same in Wellingborough as elsewhere we cover.

What should I do while I wait for a visit in Wellingborough?

If the door is stuck part-open, keep people, pets and cars clear of it and switch off the power at the isolator if it is safe to reach. Do not force the curtain or open the roller box. Your Wellingborough visit date is confirmed in writing.

Do you repair safety devices on any make of roller door?

Yes. We repair and replace safety edges and photocells on electric roller garage doors of any make, provided compatible parts are available for the control box. We don't work on sectional or up-and-over doors. If a compatible part isn't available, we'll explain the options before anything is booked.

Can photocells be added to a door that doesn't have them?

Often, if the control box has a connection for them. Some older systems need extra wiring or a replacement control box first. Tell us what's on the control box label and we'll confirm whether photocells can be added, and the price, before booking. Our battery backup and safety upgrades page covers adding devices.