Repairs and aftercare · NE24

Safety edge and photocell repairs in Blyth

If the electric roller door on your garage in Blyth won't close, or reverses for no reason, the safety edge or photocells may be at fault. We repair and replace them for homes in Northumberland, with the visit price agreed before we come out.

Request a visit Call 0800 088 6248

Guide price: from £99 inc VAT
First step: Visit price agreed first
Covers: Blyth, NE24 and NE22
Area: Northumberland

Rubber safety edge on a roller door bottom rail and a photocell sensor on the guide rail

Computer-generated image

What should I know about safety edge and photocell repairs in Blyth?

Photocells either side of the opening stop the door closing while anything is breaking the beam between them.
The engineer tests the whole circuit, because a damaged cable or control box fault can look like a failed device.
Wiping the photocell lenses and clearing the beam are safe checks to make before you request a visit.
Never tape over, bridge or bypass a safety device to make an electric roller door close.

How does it work in Blyth?

The engineer tests the circuit and replaces the faulty device, then tests the door. Any further parts are quoted before they're fitted.

STEP 01
Tell us about the door
Describe the door and what you need, with a photo or video if you can.
STEP 02
Agree the visit price
We confirm the visit price before anyone comes out.
STEP 03
Visit
The engineer finds the cause and makes the door safe where possible.
STEP 04
Parts quoted first
Any parts are quoted before they are fitted, so you decide.

How much do safety edge and photocell repairs cost in Blyth?

Item	Guide price (inc VAT)	Ex VAT
Photocell pair replacement, fitted	£99–£189	£82.50–£157.50 + VAT
Safety edge replacement, fitted	£159–£295	£132.50–£245.83 + VAT

Guide prices for homes, last reviewed 25 October 2026. Your written quote is the price. See the full price list.

Covering Blyth and nearby

We survey and fit roller garage doors across Blyth, including NE24 and NE22, as part of our coverage in Northumberland. Blyth lies around 8 miles from Morpeth.

Looking from a neighbouring town? We also cover Ashington (4 miles) and Cramlington (4 miles).

Rules that apply in Blyth

Powered door safety

Every powered door we fit is commissioned with force testing to BS EN 12453 and handed over with a Declaration of Conformity and UKCA or CE marking, as the Supply of Machinery (Safety) Regulations 2008 require.

Electrics

An electric door needs a power supply near the roller box. Electrical work must meet BS 7671, and in England some domestic electrical work is notifiable under Part P, so it is done by a registered competent person or signed off by building control.

Safety edge and photocell repairs in Blyth: questions

Do you cover Blyth?

Yes. Blyth is part of the area we cover in Northumberland, including NE24 and NE22. Get a guide price online, then we confirm a survey or visit date in writing. Dates depend on installer and engineer availability.

Do you charge more for Blyth than other towns in Northumberland?

No. Guide prices are the same for Blyth as for anywhere else we cover in Northumberland. The written quote reflects your opening and the door you choose, not your postcode, apart from islands and remote areas where any travel cost is shown in advance.

Will you fix the door on the first visit?

A fault can sometimes be found and put right on the first visit, but we never promise it. If a part needs ordering, we quote for it first, make the door safe where we can, and confirm the return date in writing.

What should I do while I wait for a visit in Blyth?

If the door is stuck part-open, keep people, pets and cars clear of it and switch off the power at the isolator if it is safe to reach. Do not force the curtain or open the roller box. Your Blyth visit date is confirmed in writing.

How do I test my safety edge and photocells?

Follow the manufacturer's instructions for your door. In general, the test checks that the door stops or reverses when the safety edge meets an obstruction while closing, and that the door won't close while the photocell beam is broken. Keep people and pets clear while testing, and repeat the test monthly.

Can I bypass the photocells to get the door shut?

No. Bypassing, bridging or taping over a safety device removes the protection that stops the door closing onto a person, pet or car. If the door won't close, switch it off at the isolator, keep the area clear and request a visit. Tell us if you're concerned about security when you get in touch.