Repairs and aftercare · PA15

Safety edge and photocell repairs in Greenock

We replace safety edges and photocell pairs on electric roller garage doors of any make in Greenock and across PA15 postcodes. After fitting, the door is tested to check it stops or reverses as it should.

Request a visit Call 0800 088 6248

Guide price: from £99 inc VAT
First step: Visit price agreed first
Covers: Greenock, PA15, PA16 and PA19
Area: Renfrewshire and Inverclyde

Rubber safety edge on a roller door bottom rail and a photocell sensor on the guide rail

Computer-generated image

What should I know about safety edge and photocell repairs in Greenock?

A pressure-sensitive safety edge on the bottom rail stops or reverses the door when it touches something while closing.
After a repair, the door is tested to check it stops or reverses on obstruction before it's handed back.
Photocells either side of the opening stop the door closing while anything is breaking the beam between them.
Replacement safety edges and photocell pairs have fitted prices, agreed before the visit is booked.

How does it work in Greenock?

The engineer tests the circuit and replaces the faulty device, then tests the door. Any further parts are quoted before they're fitted.

STEP 01
Tell us about the door
Describe the door and what you need, with a photo or video if you can.
STEP 02
Agree the visit price
We confirm the visit price before anyone comes out.
STEP 03
Visit
The engineer finds the cause and makes the door safe where possible.
STEP 04
Parts quoted first
Any parts are quoted before they are fitted, so you decide.

How much do safety edge and photocell repairs cost in Greenock?

Item	Guide price (inc VAT)	Ex VAT
Photocell pair replacement, fitted	£99–£189	£82.50–£157.50 + VAT
Safety edge replacement, fitted	£159–£295	£132.50–£245.83 + VAT

Guide prices for homes, last reviewed 25 October 2026. Your written quote is the price. See the full price list.

Covering Greenock and nearby

Our coverage in Renfrewshire and Inverclyde includes Greenock and the PA15, PA16 and PA19 postcode districts, so the same guide prices and written quotes apply here. For reference, Greenock sits roughly 15 miles from Paisley.

We also cover Helensburgh (4 miles), Dunoon (6 miles) and Vale of Leven (7 miles).

Rules that apply in Greenock

Powered door safety

Every powered door we fit is commissioned with force testing to BS EN 12453 and handed over with a Declaration of Conformity and UKCA or CE marking, as the Supply of Machinery (Safety) Regulations 2008 require.

Electrics

An electric door needs a power supply near the roller box. Part P does not apply in Scotland, but electrical work must meet BS 7671 and the Scottish building standards where it forms part of building work.

Safety edge and photocell repairs in Greenock: questions

Do you charge more for Greenock than other towns in Renfrewshire and Inverclyde?

No. Guide prices are the same for Greenock as for anywhere else we cover in Renfrewshire and Inverclyde. The written quote reflects your opening and the door you choose, not your postcode, apart from islands and remote areas where any travel cost is shown in advance.

Can I get a price for Greenock without anyone visiting?

Yes. The guide price tool takes four steps and gives a range for your opening and door type. It is a guide, not a quote: the written quote comes after the survey or once the visit price is agreed.

What should I do while I wait for a visit in Greenock?

If the door is stuck part-open, keep people, pets and cars clear of it and switch off the power at the isolator if it is safe to reach. Do not force the curtain or open the roller box. Your Greenock visit date is confirmed in writing.

Can I message you a photo of my garage in Greenock?

Yes. Photos of the opening, the inside of the garage above the door and any existing door help us give a more useful guide price for Greenock. Send them by WhatsApp or mention them in your enquiry, and we will reply in writing.

How do I test my safety edge and photocells?

Follow the manufacturer's instructions for your door. In general, the test checks that the door stops or reverses when the safety edge meets an obstruction while closing, and that the door won't close while the photocell beam is broken. Keep people and pets clear while testing, and repeat the test monthly.

Can I bypass the photocells to get the door shut?

No. Bypassing, bridging or taping over a safety device removes the protection that stops the door closing onto a person, pet or car. If the door won't close, switch it off at the isolator, keep the area clear and request a visit. Tell us if you're concerned about security when you get in touch.