Repairs and aftercare · SY11
Safety edge and photocell repairs in Oswestry
If the electric roller door on your garage in Oswestry won't close, or reverses for no reason, the safety edge or photocells may be at fault. We repair and replace them for homes in Shropshire, with the visit price agreed before we come out.
- Guide price
- from £99 inc VAT
- First step
- Visit price agreed first
- Covers
- Oswestry, SY11
- Area
- Shropshire
Computer-generated image
What should I know about safety edge and photocell repairs in Oswestry?
- Never tape over, bridge or bypass a safety device to make an electric roller door close.
- A pressure-sensitive safety edge on the bottom rail stops or reverses the door when it touches something while closing.
- The engineer tests the whole circuit, because a damaged cable or control box fault can look like a failed device.
- Replacement safety edges and photocell pairs have fitted prices, agreed before the visit is booked.
How does it work in Oswestry?
Tell us what the roller door at your home in Oswestry is doing and what you've checked. Photos of the bottom rail, photocells and control box label help.
- STEP 01
Tell us about the door
Describe the door and what you need, with a photo or video if you can.
- STEP 02
Agree the visit price
We confirm the visit price before anyone comes out.
- STEP 03
Visit
The engineer finds the cause and makes the door safe where possible.
- STEP 04
Parts quoted first
Any parts are quoted before they are fitted, so you decide.
How much do safety edge and photocell repairs cost in Oswestry?
| Item | Guide price (inc VAT) | Ex VAT |
|---|---|---|
| Photocell pair replacement, fitted | £99–£189 | £82.50–£157.50 + VAT |
| Safety edge replacement, fitted | £159–£295 | £132.50–£245.83 + VAT |
Guide prices for homes, last reviewed 25 October 2026. Your written quote is the price. See the full price list.
Covering Oswestry and nearby
We take enquiries from across Oswestry, from SY11 outwards, and confirm every price and date in writing before anything is ordered. For reference, Oswestry sits roughly 16 miles from Shrewsbury.
Looking from a neighbouring town? We also cover Rhosllannerchrugog (10 miles) and Shrewsbury (16 miles).
Rules that apply in Oswestry
Powered door safety
Every powered door we fit is commissioned with force testing to BS EN 12453 and handed over with a Declaration of Conformity and UKCA or CE marking, as the Supply of Machinery (Safety) Regulations 2008 require.
Electrics
An electric door needs a power supply near the roller box. Electrical work must meet BS 7671, and in England some domestic electrical work is notifiable under Part P, so it is done by a registered competent person or signed off by building control.
Safety edge and photocell repairs in Oswestry: questions
Do you charge more for Oswestry than other towns in Shropshire?
No. Guide prices are the same for Oswestry as for anywhere else we cover in Shropshire. The written quote reflects your opening and the door you choose, not your postcode, apart from islands and remote areas where any travel cost is shown in advance.
Do you cover Oswestry?
Yes. Oswestry is part of the area we cover in Shropshire, including SY11. Get a guide price online, then we confirm a survey or visit date in writing. Dates depend on installer and engineer availability.
How much is a visit in Oswestry?
Prices for safety edge and photocell repairs start from £99 inc VAT, and the price is agreed before anyone comes out. Any parts not covered by that price are quoted before they are fitted, so you can decide on the spot. The guide prices are the same in Oswestry as elsewhere we cover.
Can I get a price for Oswestry without anyone visiting?
Yes. The guide price tool takes four steps and gives a range for your opening and door type. It is a guide, not a quote: the written quote comes after the survey or once the visit price is agreed.
How do I test my safety edge and photocells?
Follow the manufacturer's instructions for your door. In general, the test checks that the door stops or reverses when the safety edge meets an obstruction while closing, and that the door won't close while the photocell beam is broken. Keep people and pets clear while testing, and repeat the test monthly.
Why does my roller door reverse when nothing is in the way?
A door that reverses on its own while closing is often reacting to a safety device that thinks there's an obstruction. Dirty or misaligned photocells, a damaged safety edge, a loose cable or limits that have drifted can all cause it. Clean the photocell lenses and check the beam is clear, then request a visit if it continues.
Other roller door services in Oswestry
Battery and safety in Oswestry
Repairs in Oswestry
Servicing in Oswestry
Stuck door repair in Oswestry
Steel doors in Oswestry
Low-headroom doors in Oswestry
Security-rated doors in Oswestry
Insulated doors in OswestrySafety edge and photocell repairs in Oswestry
Tell us what you need and we confirm the visit price before anyone comes out.