Repairs and aftercare · ST3

Safety edge and photocell repairs in Longton

We replace safety edges and photocell pairs on electric roller garage doors of any make in Longton and across ST3 postcodes. After fitting, the door is tested to check it stops or reverses as it should.

Request a visit Call 0800 088 6248

Guide price: from £99 inc VAT
First step: Visit price agreed first
Covers: Longton, ST3, ST4 and ST12
Area: Staffordshire

Rubber safety edge on a roller door bottom rail and a photocell sensor on the guide rail

Computer-generated image

What should I know about safety edge and photocell repairs in Longton?

Replacement safety edges and photocell pairs have fitted prices, agreed before the visit is booked.
The engineer tests the whole circuit, because a damaged cable or control box fault can look like a failed device.
A pressure-sensitive safety edge on the bottom rail stops or reverses the door when it touches something while closing.
After a repair, the door is tested to check it stops or reverses on obstruction before it's handed back.

How does it work in Longton?

The engineer tests the circuit and replaces the faulty device, then tests the door. Any further parts are quoted before they're fitted.

STEP 01
Tell us about the door
Describe the door and what you need, with a photo or video if you can.
STEP 02
Agree the visit price
We confirm the visit price before anyone comes out.
STEP 03
Visit
The engineer finds the cause and makes the door safe where possible.
STEP 04
Parts quoted first
Any parts are quoted before they are fitted, so you decide.

How much do safety edge and photocell repairs cost in Longton?

Item	Guide price (inc VAT)	Ex VAT
Photocell pair replacement, fitted	£99–£189	£82.50–£157.50 + VAT
Safety edge replacement, fitted	£159–£295	£132.50–£245.83 + VAT

Guide prices for homes, last reviewed 25 October 2026. Your written quote is the price. See the full price list.

Covering Longton and nearby

Longton is within the area we cover in Staffordshire. Homes in ST3, ST4 and ST12 get the same survey, quote and fitting process as everywhere else we work. For reference, Longton sits roughly 12 miles from Stafford.

Looking from a neighbouring town? We also cover Stoke-on-Trent (3 miles) and Newcastle-under-Lyme (4 miles).

Rules that apply in Longton

Powered door safety

Every powered door we fit is commissioned with force testing to BS EN 12453 and handed over with a Declaration of Conformity and UKCA or CE marking, as the Supply of Machinery (Safety) Regulations 2008 require.

Electrics

An electric door needs a power supply near the roller box. Electrical work must meet BS 7671, and in England some domestic electrical work is notifiable under Part P, so it is done by a registered competent person or signed off by building control.

Safety edge and photocell repairs in Longton: questions

Will you fix the door on the first visit?

A fault can sometimes be found and put right on the first visit, but we never promise it. If a part needs ordering, we quote for it first, make the door safe where we can, and confirm the return date in writing.

How much is a visit in Longton?

Prices for safety edge and photocell repairs start from £99 inc VAT, and the price is agreed before anyone comes out. Any parts not covered by that price are quoted before they are fitted, so you can decide on the spot. The guide prices are the same in Longton as elsewhere we cover.

Can I message you a photo of my garage in Longton?

Yes. Photos of the opening, the inside of the garage above the door and any existing door help us give a more useful guide price for Longton. Send them by WhatsApp or mention them in your enquiry, and we will reply in writing.

Can I get a price for Longton without anyone visiting?

Yes. The guide price tool takes four steps and gives a range for your opening and door type. It is a guide, not a quote: the written quote comes after the survey or once the visit price is agreed.

How do I test my safety edge and photocells?

Follow the manufacturer's instructions for your door. In general, the test checks that the door stops or reverses when the safety edge meets an obstruction while closing, and that the door won't close while the photocell beam is broken. Keep people and pets clear while testing, and repeat the test monthly.

Do you repair safety devices on any make of roller door?

Yes. We repair and replace safety edges and photocells on electric roller garage doors of any make, provided compatible parts are available for the control box. We don't work on sectional or up-and-over doors. If a compatible part isn't available, we'll explain the options before anything is booked.