Repairs and aftercare · CV8

Safety edge and photocell repairs in Kenilworth

We replace safety edges and photocell pairs on electric roller garage doors of any make in Kenilworth and across CV8 postcodes. After fitting, the door is tested to check it stops or reverses as it should.

Request a visit Call 0800 088 6248

Guide price: from £99 inc VAT
First step: Visit price agreed first
Covers: Kenilworth, CV8
Area: Warwickshire

Rubber safety edge on a roller door bottom rail and a photocell sensor on the guide rail

Computer-generated image

What should I know about safety edge and photocell repairs in Kenilworth?

After a repair, the door is tested to check it stops or reverses on obstruction before it's handed back.
The engineer tests the whole circuit, because a damaged cable or control box fault can look like a failed device.
Wiping the photocell lenses and clearing the beam are safe checks to make before you request a visit.
Photocells can often be added to doors that only have a safety edge, if the control box allows it.

How does it work in Kenilworth?

We confirm the visit price and the likely part before anything is booked. The visit date depends on engineer availability and is confirmed in writing.

STEP 01
Tell us about the door
Describe the door and what you need, with a photo or video if you can.
STEP 02
Agree the visit price
We confirm the visit price before anyone comes out.
STEP 03
Visit
The engineer finds the cause and makes the door safe where possible.
STEP 04
Parts quoted first
Any parts are quoted before they are fitted, so you decide.

How much do safety edge and photocell repairs cost in Kenilworth?

Item	Guide price (inc VAT)	Ex VAT
Photocell pair replacement, fitted	£99–£189	£82.50–£157.50 + VAT
Safety edge replacement, fitted	£159–£295	£132.50–£245.83 + VAT

Guide prices for homes, last reviewed 25 October 2026. Your written quote is the price. See the full price list.

Covering Kenilworth and nearby

We survey and fit roller garage doors across Kenilworth, including CV8, as part of our coverage in Warwickshire. For reference, Kenilworth sits roughly 5 miles from Warwick.

Nearby, we also take enquiries from Warwick, Coventry and Leamington Spa.

Rules that apply in Kenilworth

Powered door safety

Every powered door we fit is commissioned with force testing to BS EN 12453 and handed over with a Declaration of Conformity and UKCA or CE marking, as the Supply of Machinery (Safety) Regulations 2008 require.

Electrics

An electric door needs a power supply near the roller box. Electrical work must meet BS 7671, and in England some domestic electrical work is notifiable under Part P, so it is done by a registered competent person or signed off by building control.

Safety edge and photocell repairs in Kenilworth: questions

What should I do while I wait for a visit in Kenilworth?

If the door is stuck part-open, keep people, pets and cars clear of it and switch off the power at the isolator if it is safe to reach. Do not force the curtain or open the roller box. Your Kenilworth visit date is confirmed in writing.

Do you cover Kenilworth?

Yes. Kenilworth is part of the area we cover in Warwickshire, including CV8. Get a guide price online, then we confirm a survey or visit date in writing. Dates depend on installer and engineer availability.

Do you repair roller doors you did not fit in Kenilworth?

Yes. We repair roller garage doors of any make in Kenilworth and across CV8, where parts are available. If a part is no longer made, we tell you what will fit instead, or price a replacement door if that is the better option.

How much is a visit in Kenilworth?

Prices for safety edge and photocell repairs start from £99 inc VAT, and the price is agreed before anyone comes out. Any parts not covered by that price are quoted before they are fitted, so you can decide on the spot. The guide prices are the same in Kenilworth as elsewhere we cover.

How do I test my safety edge and photocells?

Follow the manufacturer's instructions for your door. In general, the test checks that the door stops or reverses when the safety edge meets an obstruction while closing, and that the door won't close while the photocell beam is broken. Keep people and pets clear while testing, and repeat the test monthly.

Why does my roller door reverse when nothing is in the way?

A door that reverses on its own while closing is often reacting to a safety device that thinks there's an obstruction. Dirty or misaligned photocells, a damaged safety edge, a loose cable or limits that have drifted can all cause it. Clean the photocell lenses and check the beam is clear, then request a visit if it continues.