Repairs and aftercare · WS9

Safety edge and photocell repairs in Aldridge

A split safety edge or knocked photocell on your roller door in Aldridge is worth fixing before the door is used again, because those devices stop it closing onto people, pets and cars. Homes in the WS9 area get the price agreed before booking.

Request a visit Call 0800 088 6248

Guide price: from £99 inc VAT
First step: Visit price agreed first
Covers: Aldridge, WS9, WS4 and WS8
Area: West Midlands

Rubber safety edge on a roller door bottom rail and a photocell sensor on the guide rail

Computer-generated image

What should I know about safety edge and photocell repairs in Aldridge?

The engineer tests the whole circuit, because a damaged cable or control box fault can look like a failed device.
Photocells can often be added to doors that only have a safety edge, if the control box allows it.
Replacement safety edges and photocell pairs have fitted prices, agreed before the visit is booked.
After a repair, the door is tested to check it stops or reverses on obstruction before it's handed back.

How does it work in Aldridge?

Tell us what the roller door at your home in Aldridge is doing and what you've checked. Photos of the bottom rail, photocells and control box label help.

STEP 01
Tell us about the door
Describe the door and what you need, with a photo or video if you can.
STEP 02
Agree the visit price
We confirm the visit price before anyone comes out.
STEP 03
Visit
The engineer finds the cause and makes the door safe where possible.
STEP 04
Parts quoted first
Any parts are quoted before they are fitted, so you decide.

How much do safety edge and photocell repairs cost in Aldridge?

Item	Guide price (inc VAT)	Ex VAT
Photocell pair replacement, fitted	£99–£189	£82.50–£157.50 + VAT
Safety edge replacement, fitted	£159–£295	£132.50–£245.83 + VAT

Guide prices for homes, last reviewed 25 October 2026. Your written quote is the price. See the full price list.

Covering Aldridge and nearby

Aldridge is within the area we cover in the West Midlands. Homes in WS9, WS4 and WS8 get the same survey, quote and fitting process as everywhere else we work. Aldridge is about 9 miles from Birmingham.

We also cover Walsall (3 miles), Bloxwich (4 miles) and Sutton Coldfield (5 miles).

Rules that apply in Aldridge

Powered door safety

Every powered door we fit is commissioned with force testing to BS EN 12453 and handed over with a Declaration of Conformity and UKCA or CE marking, as the Supply of Machinery (Safety) Regulations 2008 require.

Electrics

An electric door needs a power supply near the roller box. Electrical work must meet BS 7671, and in England some domestic electrical work is notifiable under Part P, so it is done by a registered competent person or signed off by building control.

Safety edge and photocell repairs in Aldridge: questions

Do you repair roller doors you did not fit in Aldridge?

Yes. We repair roller garage doors of any make in Aldridge and across WS9, WS4 and WS8, where parts are available. If a part is no longer made, we tell you what will fit instead, or price a replacement door if that is the better option.

Do you charge more for Aldridge than other towns in the West Midlands?

No. Guide prices are the same for Aldridge as for anywhere else we cover in the West Midlands. The written quote reflects your opening and the door you choose, not your postcode, apart from islands and remote areas where any travel cost is shown in advance.

What should I do while I wait for a visit in Aldridge?

If the door is stuck part-open, keep people, pets and cars clear of it and switch off the power at the isolator if it is safe to reach. Do not force the curtain or open the roller box. Your Aldridge visit date is confirmed in writing.

How much is a visit in Aldridge?

Prices for safety edge and photocell repairs start from £99 inc VAT, and the price is agreed before anyone comes out. Any parts not covered by that price are quoted before they are fitted, so you can decide on the spot. The guide prices are the same in Aldridge as elsewhere we cover.

Can photocells be added to a door that doesn't have them?

Often, if the control box has a connection for them. Some older systems need extra wiring or a replacement control box first. Tell us what's on the control box label and we'll confirm whether photocells can be added, and the price, before booking. Our battery backup and safety upgrades page covers adding devices.

Can I bypass the photocells to get the door shut?

No. Bypassing, bridging or taping over a safety device removes the protection that stops the door closing onto a person, pet or car. If the door won't close, switch it off at the isolator, keep the area clear and request a visit. Tell us if you're concerned about security when you get in touch.