Roller door types · SE10

Steel roller garage doors in Greenwich

For homes in Greenwich, a steel roller door comes with a tubular motor, rolling-code remotes and tested safety devices. We fit throughout SE10, and you receive the Declaration of Conformity for the powered door on fitting day.

Get my guide price Call 0800 088 6248

Guide price: from £1,345 inc VAT
First step: Free survey
Covers: Greenwich, SE10, SE8 and SE14
Area: Greater London

Galvanised steel roller garage door on a flat-roofed brick garage beside a house

Computer-generated image

What should I know about steel roller garage doors in Greenwich?

Decide where the override handle will be stored, because you'll need it to wind a steel curtain up during a power cut.
Think about whether battery backup is worth adding, so the door keeps working for a limited number of cycles when the power is off.
Check the lintel above the opening for cracks or sagging, since a heavier steel curtain relies on sound fixings at the top.
Measure the width of your opening, because our steel price list covers singles up to 2.4 m and doubles of 3.0 to 4.0 m, and other widths are priced on survey.

How does it work in Greenwich?

Once you accept, the fitting date is confirmed in writing, depending on installer availability. If a new spur is needed, it's shown in the quote and fitted by a qualified electrician.

STEP 01
Guide price
Answer four quick questions online and see a price range for your opening.
STEP 02
Free survey
We measure the opening, headroom, side room, lintel and power, and talk through options.
STEP 03
Written quote
You get the price inc VAT, what is included and the payment stages in writing.
STEP 04
Fitting day
Old door out, new door in, commissioned and handed over with the paperwork.

How much do steel roller garage doors cost in Greenwich?

Item	Guide price (inc VAT)	Ex VAT
Steel electric roller door, single up to 2.4 m	£1,345–£1,995	£1,120.83–£1,662.50 + VAT
Steel electric roller door, double 3.0–4.0 m	£2,095–£3,095	£1,745.83–£2,579.17 + VAT

Guide prices for homes, last reviewed 25 October 2026. Your written quote is the price. See the full price list.

Covering Greenwich and nearby

Our coverage in Greater London includes Greenwich and the SE10, SE8 and SE14 postcode districts, so the same guide prices and written quotes apply here. Greenwich is about 6 miles from Westminster.

Other places close to Greenwich that we cover include Lewisham, Blackheath and Canary Wharf.

Rules that apply in Greenwich

Planning

Replacing a garage door is not usually development that needs planning permission. Check first if your home is listed (listed building consent covers works that affect its character), sits in a conservation area with an Article 4 direction, or is on an estate where planning conditions or covenants control garage doors.

Electrics

An electric door needs a power supply near the roller box. Electrical work must meet BS 7671, and in England some domestic electrical work is notifiable under Part P, so it is done by a registered competent person or signed off by building control.

Steel roller garage doors in Greenwich: questions

How much do steel roller garage doors cost in Greenwich?

Our guide price for steel roller garage doors is from £1,345 inc VAT. The figure for your garage depends on the opening size, the door specification and any extras, and is confirmed in a written quote after a free survey. The guide prices are the same in Greenwich as elsewhere we cover.

Can you remove my old garage door in Greenwich?

Yes. Every door price includes removing and disposing of an old roller or up-and-over door at your Greenwich address, along with standard fixings and making good to the reveals. If the frame or lintel needs work, we price it at the survey before you agree.

Can I get a price for Greenwich without anyone visiting?

Yes. The guide price tool takes four steps and gives a range for your opening and door type. It is a guide, not a quote: the written quote comes after the survey or once the visit price is agreed.

Do you cover Greenwich?

Yes. Greenwich is part of the area we cover in Greater London, including SE10, SE8 and SE14. Get a guide price online, then we confirm a survey or visit date in writing. Dates depend on installer and engineer availability.

Can I have a manual steel roller door?

The steel doors in our price list are electric, because a steel curtain is heavier than an aluminium one and the tubular motor does the lifting. If you want a hand-operated door, our manual doors use single-skin aluminium laths. Where there's no socket near the box, a qualified electrician can fit a fused spur from an existing circuit, shown as a separate line in your quote; a new supply to a garage with no power is priced on survey.

Why are steel doors over 4 m wide priced on survey?

Our standard steel price list covers single openings up to 2.4 m and doubles of 3.0 to 4.0 m; other widths are priced on survey. A wider steel door needs the opening, lintel and fixing points checked individually before the right door can be specified, so we price it after the survey rather than from a table. For openings up to about 5.5 m, insulated aluminium doors have a set price band you can see online.