Fitting, replacement and upgrades · PO12
Up-and-over to roller door conversion in Gosport
Swapping an up-and-over door for a roller door in Gosport starts with a free survey of your opening. We check headroom, side room, the lintel and the reveals, then quote in writing for homes in Hampshire, including removal and disposal of the old door.
- Guide price
- from £1,195 inc VAT
- First step
- Free survey
- Covers
- Gosport, PO12, PO1 and PO5
- Area
- Hampshire
Computer-generated image
What should I know about up-and-over to roller door conversion in Gosport?
- Clear width can improve slightly after a conversion, because there are no swing-out arms at the sides of the opening.
- An up-and-over frame is kept only if it is sound and square; otherwise it comes out and the opening is prepared.
- If headroom behind the lintel is short, the roller box can go under the lintel or be face-fixed on the wall.
- Taking out the up-and-over tracks frees the garage ceiling for shelving, storage or better lighting.
How does it work in Gosport?
After you accept, the fitting date is confirmed in writing according to installer availability. The up-and-over comes out, the roller door goes in and is commissioned, and you're shown how everything works.
- STEP 01
Guide price
Answer four quick questions online and see a price range for your opening.
- STEP 02
Free survey
We measure the opening, headroom, side room, lintel and power, and talk through options.
- STEP 03
Written quote
You get the price inc VAT, what is included and the payment stages in writing.
- STEP 04
Fitting day
Old door out, new door in, commissioned and handed over with the paperwork.
How much does up-and-over to roller door conversion cost in Gosport?
| Item | Guide price (inc VAT) | Ex VAT |
|---|---|---|
| Insulated electric roller door, single up to 2.4 m | £1,495–£2,295 | £1,245.83–£1,912.50 + VAT |
| Electric single-skin roller door, single up to 2.4 m | £1,195–£1,745 | £995.83–£1,454.17 + VAT |
| Insulated electric roller door, double 3.0–4.0 m | £2,195–£3,295 | £1,829.17–£2,745.83 + VAT |
Guide prices for homes, last reviewed 25 October 2026. Your written quote is the price. See the full price list.
Covering Gosport and nearby
We survey and fit roller garage doors across Gosport, including PO12, PO1 and PO5, as part of our coverage in Hampshire. Gosport is about 20 miles from Winchester.
We also cover Portsmouth (2 miles), Fareham (4 miles) and Ryde (5 miles).
Rules that apply in Gosport
Structural work
Widening the opening, removing a central pier or fitting a new lintel is structural work that needs Building Regulations approval from building control before it starts.
Planning
Replacing a garage door is not usually development that needs planning permission. Check first if your home is listed (listed building consent covers works that affect its character), sits in a conservation area with an Article 4 direction, or is on an estate where planning conditions or covenants control garage doors.
Up-and-over to roller door conversion in Gosport: questions
Is an electric roller door worth it for a garage in Gosport?
That depends on how often you use the garage. An electric door opens from the car with a remote and has safety devices fitted, while a manual door costs less and suits occasional use. We price both for your Gosport garage so you can compare.
Do you charge more for Gosport than other towns in Hampshire?
No. Guide prices are the same for Gosport as for anywhere else we cover in Hampshire. The written quote reflects your opening and the door you choose, not your postcode, apart from islands and remote areas where any travel cost is shown in advance.
Do I need permission for a new roller garage door in Gosport?
Replacing a garage door is not usually development that needs planning permission in England, and widening the opening needs building control approval. If you live in a listed building, a conservation area or on an estate with covenants or planning conditions, check before ordering.
How much does up-and-over to roller door conversion cost in Gosport?
Our guide price for up-and-over to roller door conversion is from £1,195 inc VAT. The figure for your garage depends on the opening size, the door specification and any extras, and is confirmed in a written quote after a free survey. The guide prices are the same in Gosport as elsewhere we cover.
Does a roller door need more headroom than an up-and-over?
A roller door needs headroom above the opening for its box, while an up-and-over needs space inside the garage for its tracks and for the panel when it's open. Domestic roller boxes are commonly around 205 to 300 mm or more, depending on door height and lath size. If there isn't room behind the lintel, other box positions are possible.
Do I need planning permission to change to a roller door?
Changing the door on an existing garage opening usually doesn't need planning permission, but conservation areas, listed buildings, flats, and estates with planning conditions or covenants can be different. If any of those apply, check with your council or management company before you book. Our guide on planning permission and building regulations explains the questions to ask.
Other roller door services in Gosport
Installation in Gosport
Replacement in Gosport
Insulated doors in Gosport
Low-headroom doors in Gosport
Safety edge and photocells in Gosport
Security-rated doors in Gosport
Remotes and keypads in Gosport
Damaged laths in GosportUp-and-over to roller door conversion in Gosport
See a guide price in four steps, then book a free survey.