Call 0800 088 6248

Fitting, replacement and upgrades · PH1

Up-and-over to roller door conversion in Perth

Converting a garage in Perth from up-and-over to roller can give a little more clear width and a clear ceiling. We can fit insulated or single-skin, manual or electric roller doors for homes in Perth and Kinross, after a free survey.

Guide price
from £1,195 inc VAT
First step
Free survey
Covers
Perth, PH1 and PH2
Old white steel up-and-over garage door with rust along the bottom edgeComputer-generated image

What should I know about up-and-over to roller door conversion in Perth?

  • Electric conversions are commissioned with force testing to BS EN 12453 and a Declaration of Conformity at handover.
  • The old up-and-over panel, its springs or counterweights, tracks and arms are removed and taken away as part of the price.
  • An up-and-over frame is kept only if it is sound and square; otherwise it comes out and the opening is prepared.
  • We check the lintel and reveals at the survey, and price a new lintel or building out the reveals before you agree.

How does it work in Perth?

We measure the opening, check the frame, lintel, reveals, headroom and power, and agree the box position with you. The written quote shows the door, removal and disposal, and any extra work as separate lines.

  1. STEP 01

    Guide price

    Answer four quick questions online and see a price range for your opening.

  2. STEP 02

    Free survey

    We measure the opening, headroom, side room, lintel and power, and talk through options.

  3. STEP 03

    Written quote

    You get the price inc VAT, what is included and the payment stages in writing.

  4. STEP 04

    Fitting day

    Old door out, new door in, commissioned and handed over with the paperwork.

How much does up-and-over to roller door conversion cost in Perth?

ItemGuide price (inc VAT)Ex VAT
Insulated electric roller door, single up to 2.4 m£1,495–£2,295£1,245.83–£1,912.50 + VAT
Electric single-skin roller door, single up to 2.4 m£1,195–£1,745£995.83–£1,454.17 + VAT
Insulated electric roller door, double 3.0–4.0 m£2,195–£3,295£1,829.17–£2,745.83 + VAT

Guide prices for homes, last reviewed 25 October 2026. Your written quote is the price. See the full price list.

Covering Perth and nearby

Perth is within the area we cover in Perth and Kinross. Homes in PH1 and PH2 get the same survey, quote and fitting process as everywhere else we work.

We also cover Kinross (13 miles), Blairgowrie (14 miles) and Crieff (16 miles).

Rules that apply in Perth

Structural work

Structural alterations, such as widening the opening or fitting a new lintel, need a building warrant from the local authority before work starts.

Planning

Replacing a garage door is not usually development that needs planning permission in Scotland. Listed building consent applies to listed buildings, and conservation-area controls, planning conditions or title conditions can restrict changes to how a garage looks, so check before ordering.

Up-and-over to roller door conversion in Perth: questions

How long does it take to fit a roller garage door in Perth?

Most single domestic roller doors are fitted in a day once the door has been made, including removing the old door. Wider doors, conversions that need building work and jobs where power has to be run can take longer; the quote says what to expect.

Do you cover Perth?

Yes. Perth is part of the area we cover in Perth and Kinross, including PH1 and PH2. Get a guide price online, then we confirm a survey or visit date in writing. Dates depend on installer and engineer availability.

Do you charge more for Perth than other towns in Perth and Kinross?

No. Guide prices are the same for Perth as for anywhere else we cover in Perth and Kinross. The written quote reflects your opening and the door you choose, not your postcode, apart from islands and remote areas where any travel cost is shown in advance.

Can you remove my old garage door in Perth?

Yes. Every door price includes removing and disposing of an old roller or up-and-over door at your Perth address, along with standard fixings and making good to the reveals. If the frame or lintel needs work, we price it at the survey before you agree.

Will I lose height in the opening with a roller door?

Not usually, if the box can sit behind the lintel inside the garage, which is the normal position. If there's too little headroom inside, the box can go under the lintel, which does reduce the clear opening height, or be face-fixed on the front of the wall. We measure this at the survey and tell you before you commit.

Can you keep my existing up-and-over frame?

Sometimes. If the frame is sound, square and securely fixed, it can stay as a finish around the opening and the roller door is fitted to suit it. If it's rotten, damaged or out of square, we take it out and prepare the opening for the new door. The survey decides which applies to your garage.

Other roller door services in Perth

Up-and-over to roller door conversion in Perth

See a guide price in four steps, then book a free survey.

CallGuide price