Fitting, replacement and upgrades · SM7
Up-and-over to roller door conversion in Banstead
If the up-and-over door on your garage in Banstead swings out over the drive or fills the ceiling with tracks, a roller door can solve both. We convert garages across SM7 postcodes, keeping the old frame only when it is sound.
- Guide price
- from £1,195 inc VAT
- First step
- Free survey
- Covers
- Banstead, SM7, SM2 and SM1
- Area
- Surrey
Computer-generated image
What should I know about up-and-over to roller door conversion in Banstead?
- If headroom behind the lintel is short, the roller box can go under the lintel or be face-fixed on the wall.
- We check the lintel and reveals at the survey, and price a new lintel or building out the reveals before you agree.
- With no swing-out panel, you can park closer to the garage and still open the door all the way.
- Clear width can improve slightly after a conversion, because there are no swing-out arms at the sides of the opening.
How does it work in Banstead?
After you accept, the fitting date is confirmed in writing according to installer availability. The up-and-over comes out, the roller door goes in and is commissioned, and you're shown how everything works.
- STEP 01
Guide price
Answer four quick questions online and see a price range for your opening.
- STEP 02
Free survey
We measure the opening, headroom, side room, lintel and power, and talk through options.
- STEP 03
Written quote
You get the price inc VAT, what is included and the payment stages in writing.
- STEP 04
Fitting day
Old door out, new door in, commissioned and handed over with the paperwork.
How much does up-and-over to roller door conversion cost in Banstead?
| Item | Guide price (inc VAT) | Ex VAT |
|---|---|---|
| Insulated electric roller door, single up to 2.4 m | £1,495–£2,295 | £1,245.83–£1,912.50 + VAT |
| Electric single-skin roller door, single up to 2.4 m | £1,195–£1,745 | £995.83–£1,454.17 + VAT |
| Insulated electric roller door, double 3.0–4.0 m | £2,195–£3,295 | £1,829.17–£2,745.83 + VAT |
Guide prices for homes, last reviewed 25 October 2026. Your written quote is the price. See the full price list.
Covering Banstead and nearby
We survey and fit roller garage doors across Banstead, including SM7, SM2 and SM1, as part of our coverage in Surrey. Banstead lies around 17 miles from Guildford.
We also cover Sutton (2 miles), Ewell (3 miles) and Epsom (3 miles).
Rules that apply in Banstead
Structural work
Widening the opening, removing a central pier or fitting a new lintel is structural work that needs Building Regulations approval from building control before it starts.
Planning
Replacing a garage door is not usually development that needs planning permission. Check first if your home is listed (listed building consent covers works that affect its character), sits in a conservation area with an Article 4 direction, or is on an estate where planning conditions or covenants control garage doors.
Up-and-over to roller door conversion in Banstead: questions
Do you cover Banstead?
Yes. Banstead is part of the area we cover in Surrey, including SM7, SM2 and SM1. Get a guide price online, then we confirm a survey or visit date in writing. Dates depend on installer and engineer availability.
Can I get a price for Banstead without anyone visiting?
Yes. The guide price tool takes four steps and gives a range for your opening and door type. It is a guide, not a quote: the written quote comes after the survey or once the visit price is agreed.
Do you charge more for Banstead than other towns in Surrey?
No. Guide prices are the same for Banstead as for anywhere else we cover in Surrey. The written quote reflects your opening and the door you choose, not your postcode, apart from islands and remote areas where any travel cost is shown in advance.
How much does up-and-over to roller door conversion cost in Banstead?
Our guide price for up-and-over to roller door conversion is from £1,195 inc VAT. The figure for your garage depends on the opening size, the door specification and any extras, and is confirmed in a written quote after a free survey. The guide prices are the same in Banstead as elsewhere we cover.
Does a roller door need more headroom than an up-and-over?
A roller door needs headroom above the opening for its box, while an up-and-over needs space inside the garage for its tracks and for the panel when it's open. Domestic roller boxes are commonly around 205 to 300 mm or more, depending on door height and lath size. If there isn't room behind the lintel, other box positions are possible.
Will I lose height in the opening with a roller door?
Not usually, if the box can sit behind the lintel inside the garage, which is the normal position. If there's too little headroom inside, the box can go under the lintel, which does reduce the clear opening height, or be face-fixed on the front of the wall. We measure this at the survey and tell you before you commit.
Other roller door services in Banstead
Installation in Banstead
Replacement in Banstead
Insulated doors in Banstead
Low-headroom doors in Banstead
Double and wide doors in Banstead
Vision and vent laths in Banstead
Stuck door repair in Banstead
Electric doors in BansteadUp-and-over to roller door conversion in Banstead
See a guide price in four steps, then book a free survey.