Sizes, finishes and features · EX4

Roller garage doors with vision and vent laths in Exeter

Would some daylight or fresh air help in your garage in Exeter? We supply and fit roller doors with vision or vent laths in Devon, and you can see a guide price including the extra online before booking a free survey.

Get my guide price Call 0800 088 6248

Guide price: from £1,040 inc VAT
First step: Free survey
Covers: Exeter, EX4, EX1 and EX2
Area: Devon

White roller garage door seen from inside with a band of perforated vision laths letting in daylight

Computer-generated image

What should I know about roller garage doors with vision and vent laths in Exeter?

Ask whether vision or vent laths are covered by the certificate if you're choosing a security-rated door model.
Weigh up insulation if you're choosing insulated laths, as vent laths let air through and vision laths hold less heat.
Consider the height you want the laths at, for example level with a workbench or higher up to keep the view in limited.
Check the agreed position of the laths in your written quote, and again on fitting day before the installer finishes.

How does it work in Exeter?

A free survey in Exeter then measures the opening and agrees the type, number and position of the laths. Your written quote records all of it.

STEP 01
Guide price
Answer four quick questions online and see a price range for your opening.
STEP 02
Free survey
We measure the opening, headroom, side room, lintel and power, and talk through options.
STEP 03
Written quote
You get the price inc VAT, what is included and the payment stages in writing.
STEP 04
Fitting day
Old door out, new door in, commissioned and handed over with the paperwork.

How much do roller garage doors with vision and vent laths cost in Exeter?

Item	Guide price (inc VAT)	Ex VAT
Manual roller door, single, with vision or vent laths	£1,040–£1,640	£866.67–£1,366.67 + VAT
Vision or vent laths (added to a new door)	£145–£345	£120.83–£287.50 + VAT

Guide prices for homes, last reviewed 25 October 2026. Your written quote is the price. See the full price list.

Covering Exeter and nearby

Our coverage in Devon includes Exeter and the EX4, EX1 and EX2 postcode districts, so the same guide prices and written quotes apply here.

Looking from a neighbouring town? We also cover Exmouth (9 miles) and Tiverton (12 miles).

Rules that apply in Exeter

Electrics

An electric door needs a power supply near the roller box. Electrical work must meet BS 7671, and in England some domestic electrical work is notifiable under Part P, so it is done by a registered competent person or signed off by building control.

Planning

Replacing a garage door is not usually development that needs planning permission. Check first if your home is listed (listed building consent covers works that affect its character), sits in a conservation area with an Article 4 direction, or is on an estate where planning conditions or covenants control garage doors.

Roller garage doors with vision and vent laths in Exeter: questions

Is the survey in Exeter really free?

Yes. For a new door, a replacement or a conversion, the survey is free and there is no obligation to go ahead. We measure the opening, check the lintel, headroom, side room and power, and send a written quote afterwards.

How long does it take to fit a roller garage door in Exeter?

Most single domestic roller doors are fitted in a day once the door has been made, including removing the old door. Wider doors, conversions that need building work and jobs where power has to be run can take longer; the quote says what to expect.

What do you check at a survey in EX4?

At a survey in EX4 we measure the width and height of the opening, the headroom above it for the roller box, the side room for the guide rails and the floor level. We also look at the lintel and where power can come from for an electric door.

Do you charge more for Exeter than other towns in Devon?

No. Guide prices are the same for Exeter as for anywhere else we cover in Devon. The written quote reflects your opening and the door you choose, not your postcode, apart from islands and remote areas where any travel cost is shown in advance.

Can I have vision laths on an electric roller door?

Yes. Vision and vent laths are part of the curtain, so they coil onto the barrel and run in the guides like the rest of the laths, whether the door is manual or electric. An electric door with vision laths is commissioned in the usual way, with the limits set and the safety edge or photocells tested.

How do I clean vision laths?

Clean them gently, following the manufacturer's care guidance that comes with the door, and avoid abrasive cleaners or scourers that could scratch the see-through sections. Do it with the door closed and, on an electric door, make sure no one operates it while you're cleaning. Keep the guide rails clear of debris at the same time.