Sizes, finishes and features · CT5

Roller garage doors with vision and vent laths in Whitstable

Vision laths bring light into a windowless garage, and vent laths let air through, which can suit a garage in Whitstable used as a workshop or store. We cover the CT5 area and agree the lath position at survey.

Get my guide price Call 0800 088 6248

Guide price: from £1,040 inc VAT
First step: Free survey
Covers: Whitstable, CT5
Area: Kent

White roller garage door seen from inside with a band of perforated vision laths letting in daylight

Computer-generated image

What should I know about roller garage doors with vision and vent laths in Whitstable?

Think about privacy, because vision laths can let people glimpse what's inside when the garage light is on after dark.
Decide whether the garage needs daylight, airflow or both, since vision and vent laths do different jobs.
Weigh up insulation if you're choosing insulated laths, as vent laths let air through and vision laths hold less heat.
Keep anything that must stay completely dry away from vent laths, as some moisture may get in during wet, windy weather.

How does it work in Whitstable?

When you're happy with the quote and accept it, we put the fitting date in writing, based on when an installer is available. The door, including its special laths, is only ordered after that acceptance.

STEP 01
Guide price
Answer four quick questions online and see a price range for your opening.
STEP 02
Free survey
We measure the opening, headroom, side room, lintel and power, and talk through options.
STEP 03
Written quote
You get the price inc VAT, what is included and the payment stages in writing.
STEP 04
Fitting day
Old door out, new door in, commissioned and handed over with the paperwork.

How much do roller garage doors with vision and vent laths cost in Whitstable?

Item	Guide price (inc VAT)	Ex VAT
Manual roller door, single, with vision or vent laths	£1,040–£1,640	£866.67–£1,366.67 + VAT
Vision or vent laths (added to a new door)	£145–£345	£120.83–£287.50 + VAT

Guide prices for homes, last reviewed 25 October 2026. Your written quote is the price. See the full price list.

Covering Whitstable and nearby

If your garage is in Whitstable (CT5), you can get a guide price online now, and we confirm any survey or visit date in writing. Whitstable lies around 23 miles from Maidstone.

Other places close to Whitstable that we cover include Herne Bay, Canterbury and Faversham.

Rules that apply in Whitstable

Powered door safety

Every powered door we fit is commissioned with force testing to BS EN 12453 and handed over with a Declaration of Conformity and UKCA or CE marking, as the Supply of Machinery (Safety) Regulations 2008 require.

Structural work

Widening the opening, removing a central pier or fitting a new lintel is structural work that needs Building Regulations approval from building control before it starts.

Roller garage doors with vision and vent laths in Whitstable: questions

Is the survey in Whitstable really free?

Yes. For a new door, a replacement or a conversion, the survey is free and there is no obligation to go ahead. We measure the opening, check the lintel, headroom, side room and power, and send a written quote afterwards.

Do you charge more for Whitstable than other towns in Kent?

No. Guide prices are the same for Whitstable as for anywhere else we cover in Kent. The written quote reflects your opening and the door you choose, not your postcode, apart from islands and remote areas where any travel cost is shown in advance.

Can I message you a photo of my garage in Whitstable?

Yes. Photos of the opening, the inside of the garage above the door and any existing door help us give a more useful guide price for Whitstable. Send them by WhatsApp or mention them in your enquiry, and we will reply in writing.

How long does it take to fit a roller garage door in Whitstable?

Most single domestic roller doors are fitted in a day once the door has been made, including removing the old door. Wider doors, conversions that need building work and jobs where power has to be run can take longer; the quote says what to expect.

Can I have vision laths on an electric roller door?

Yes. Vision and vent laths are part of the curtain, so they coil onto the barrel and run in the guides like the rest of the laths, whether the door is manual or electric. An electric door with vision laths is commissioned in the usual way, with the limits set and the safety edge or photocells tested.

How do I clean vision laths?

Clean them gently, following the manufacturer's care guidance that comes with the door, and avoid abrasive cleaners or scourers that could scratch the see-through sections. Do it with the door closed and, on an electric door, make sure no one operates it while you're cleaning. Keep the guide rails clear of debris at the same time.