Sizes, finishes and features · LE16

Roller garage doors with vision and vent laths in Market Harborough

We fit roller garage doors with vision and vent laths in Market Harborough, on manual, electric and insulated doors. The number and position of the laths are written into your quote after a free survey in Leicestershire.

Get my guide price Call 0800 088 6248

Guide price: from £1,040 inc VAT
First step: Free survey
Covers: Market Harborough, LE16
Area: Leicestershire

White roller garage door seen from inside with a band of perforated vision laths letting in daylight

Computer-generated image

What should I know about roller garage doors with vision and vent laths in Market Harborough?

Check the agreed position of the laths in your written quote, and again on fitting day before the installer finishes.
Consider the height you want the laths at, for example level with a workbench or higher up to keep the view in limited.
Plan vision or vent laths into your order from the start, because they're built into the curtain when the door is made.
Weigh up insulation if you're choosing insulated laths, as vent laths let air through and vision laths hold less heat.

How does it work in Market Harborough?

When you're happy with the quote and accept it, we put the fitting date in writing, based on when an installer is available. The door, including its special laths, is only ordered after that acceptance.

STEP 01
Guide price
Answer four quick questions online and see a price range for your opening.
STEP 02
Free survey
We measure the opening, headroom, side room, lintel and power, and talk through options.
STEP 03
Written quote
You get the price inc VAT, what is included and the payment stages in writing.
STEP 04
Fitting day
Old door out, new door in, commissioned and handed over with the paperwork.

How much do roller garage doors with vision and vent laths cost in Market Harborough?

Item	Guide price (inc VAT)	Ex VAT
Manual roller door, single, with vision or vent laths	£1,040–£1,640	£866.67–£1,366.67 + VAT
Vision or vent laths (added to a new door)	£145–£345	£120.83–£287.50 + VAT

Guide prices for homes, last reviewed 25 October 2026. Your written quote is the price. See the full price list.

Covering Market Harborough and nearby

If your garage is in Market Harborough (LE16), you can get a guide price online now, and we confirm any survey or visit date in writing. For reference, Market Harborough sits roughly 14 miles from Leicester.

Nearby, we also take enquiries from Corby, Kettering and Wigston.

Rules that apply in Market Harborough

Structural work

Widening the opening, removing a central pier or fitting a new lintel is structural work that needs Building Regulations approval from building control before it starts.

Electrics

An electric door needs a power supply near the roller box. Electrical work must meet BS 7671, and in England some domestic electrical work is notifiable under Part P, so it is done by a registered competent person or signed off by building control.

Roller garage doors with vision and vent laths in Market Harborough: questions

Can I get a price for Market Harborough without anyone visiting?

Yes. The guide price tool takes four steps and gives a range for your opening and door type. It is a guide, not a quote: the written quote comes after the survey or once the visit price is agreed.

Do I need permission for a new roller garage door in Market Harborough?

Replacing a garage door is not usually development that needs planning permission in England, and widening the opening needs building control approval. If you live in a listed building, a conservation area or on an estate with covenants or planning conditions, check before ordering.

Can I message you a photo of my garage in Market Harborough?

Yes. Photos of the opening, the inside of the garage above the door and any existing door help us give a more useful guide price for Market Harborough. Send them by WhatsApp or mention them in your enquiry, and we will reply in writing.

How long does it take to fit a roller garage door in Market Harborough?

Most single domestic roller doors are fitted in a day once the door has been made, including removing the old door. Wider doors, conversions that need building work and jobs where power has to be run can take longer; the quote says what to expect.

Can I have vision laths on an electric roller door?

Yes. Vision and vent laths are part of the curtain, so they coil onto the barrel and run in the guides like the rest of the laths, whether the door is manual or electric. An electric door with vision laths is commissioned in the usual way, with the limits set and the safety edge or photocells tested.

Do vent laths let rain or insects into the garage?

Vent laths have openings by design, so some air movement comes with them, and in very wet, windy weather a little moisture may get in. If you store things that must stay completely dry, keep them away from the door. Think about where the vent laths sit in the curtain, and discuss it at the survey before you decide.