Sizes, finishes and features · TS10

Roller garage doors with vision and vent laths in Redcar

Vision laths bring light into a windowless garage, and vent laths let air through, which can suit a garage in Redcar used as a workshop or store. We cover the TS10 area and agree the lath position at survey.

Get my guide price Call 0800 088 6248

Guide price: from £1,040 inc VAT
First step: Free survey
Covers: Redcar, TS10 and TS11
Area: North Yorkshire

White roller garage door seen from inside with a band of perforated vision laths letting in daylight

Computer-generated image

What should I know about roller garage doors with vision and vent laths in Redcar?

Weigh up insulation if you're choosing insulated laths, as vent laths let air through and vision laths hold less heat.
Consider the height you want the laths at, for example level with a workbench or higher up to keep the view in limited.
Keep anything that must stay completely dry away from vent laths, as some moisture may get in during wet, windy weather.
Ask whether vision or vent laths are covered by the certificate if you're choosing a security-rated door model.

How does it work in Redcar?

A free survey in Redcar then measures the opening and agrees the type, number and position of the laths. Your written quote records all of it.

STEP 01
Guide price
Answer four quick questions online and see a price range for your opening.
STEP 02
Free survey
We measure the opening, headroom, side room, lintel and power, and talk through options.
STEP 03
Written quote
You get the price inc VAT, what is included and the payment stages in writing.
STEP 04
Fitting day
Old door out, new door in, commissioned and handed over with the paperwork.

How much do roller garage doors with vision and vent laths cost in Redcar?

Item	Guide price (inc VAT)	Ex VAT
Manual roller door, single, with vision or vent laths	£1,040–£1,640	£866.67–£1,366.67 + VAT
Vision or vent laths (added to a new door)	£145–£345	£120.83–£287.50 + VAT

Guide prices for homes, last reviewed 25 October 2026. Your written quote is the price. See the full price list.

Covering Redcar and nearby

Redcar is within the area we cover in North Yorkshire. Homes in TS10 and TS11 get the same survey, quote and fitting process as everywhere else we work. Redcar lies around 46 miles from York.

Nearby, we also take enquiries from Middlesbrough, Hartlepool and Billingham.

Rules that apply in Redcar

Electrics

An electric door needs a power supply near the roller box. Electrical work must meet BS 7671, and in England some domestic electrical work is notifiable under Part P, so it is done by a registered competent person or signed off by building control.

Planning

Replacing a garage door is not usually development that needs planning permission. Check first if your home is listed (listed building consent covers works that affect its character), sits in a conservation area with an Article 4 direction, or is on an estate where planning conditions or covenants control garage doors.

Roller garage doors with vision and vent laths in Redcar: questions

Can I get a price for Redcar without anyone visiting?

Yes. The guide price tool takes four steps and gives a range for your opening and door type. It is a guide, not a quote: the written quote comes after the survey or once the visit price is agreed.

Do you charge more for Redcar than other towns in North Yorkshire?

No. Guide prices are the same for Redcar as for anywhere else we cover in North Yorkshire. The written quote reflects your opening and the door you choose, not your postcode, apart from islands and remote areas where any travel cost is shown in advance.

Is an electric roller door worth it for a garage in Redcar?

That depends on how often you use the garage. An electric door opens from the car with a remote and has safety devices fitted, while a manual door costs less and suits occasional use. We price both for your Redcar garage so you can compare.

What do you check at a survey in TS10?

At a survey in TS10 we measure the width and height of the opening, the headroom above it for the roller box, the side room for the guide rails and the floor level. We also look at the lintel and where power can come from for an electric door.

How do I clean vision laths?

Clean them gently, following the manufacturer's care guidance that comes with the door, and avoid abrasive cleaners or scourers that could scratch the see-through sections. Do it with the door closed and, on an electric door, make sure no one operates it while you're cleaning. Keep the guide rails clear of debris at the same time.

Can vision laths be added to my existing roller door?

Vision and vent laths are built into the curtain when a new door is made, which is why we offer them as an extra on new doors. Changing laths in an existing curtain depends on finding compatible laths for that door, so if you want daylight or ventilation in your current garage, it's usually simplest to plan them into a replacement door.