Sizes, finishes and features · DE14

Roller garage doors with vision and vent laths in Burton upon Trent

Would some daylight or fresh air help in your garage in Burton upon Trent? We supply and fit roller doors with vision or vent laths in Staffordshire, and you can see a guide price including the extra online before booking a free survey.

Get my guide price Call 0800 088 6248

Guide price: from £1,040 inc VAT
First step: Free survey
Covers: Burton upon Trent, DE14, DE15 and DE13
Area: Staffordshire

White roller garage door seen from inside with a band of perforated vision laths letting in daylight

Computer-generated image

What should I know about roller garage doors with vision and vent laths in Burton upon Trent?

Check the agreed position of the laths in your written quote, and again on fitting day before the installer finishes.
Think about privacy, because vision laths can let people glimpse what's inside when the garage light is on after dark.
Decide whether the garage needs daylight, airflow or both, since vision and vent laths do different jobs.
Plan vision or vent laths into your order from the start, because they're built into the curtain when the door is made.

How does it work in Burton upon Trent?

When you're happy with the quote and accept it, we put the fitting date in writing, based on when an installer is available. The door, including its special laths, is only ordered after that acceptance.

STEP 01
Guide price
Answer four quick questions online and see a price range for your opening.
STEP 02
Free survey
We measure the opening, headroom, side room, lintel and power, and talk through options.
STEP 03
Written quote
You get the price inc VAT, what is included and the payment stages in writing.
STEP 04
Fitting day
Old door out, new door in, commissioned and handed over with the paperwork.

How much do roller garage doors with vision and vent laths cost in Burton upon Trent?

Item	Guide price (inc VAT)	Ex VAT
Manual roller door, single, with vision or vent laths	£1,040–£1,640	£866.67–£1,366.67 + VAT
Vision or vent laths (added to a new door)	£145–£345	£120.83–£287.50 + VAT

Guide prices for homes, last reviewed 25 October 2026. Your written quote is the price. See the full price list.

Covering Burton upon Trent and nearby

Burton upon Trent is within the area we cover in Staffordshire. Homes in DE14, DE15 and DE13 get the same survey, quote and fitting process as everywhere else we work. Burton upon Trent lies around 20 miles from Stafford.

We also cover Swadlincote (4 miles), Derby (11 miles) and Lichfield (12 miles).

Rules that apply in Burton upon Trent

Structural work

Widening the opening, removing a central pier or fitting a new lintel is structural work that needs Building Regulations approval from building control before it starts.

Electrics

An electric door needs a power supply near the roller box. Electrical work must meet BS 7671, and in England some domestic electrical work is notifiable under Part P, so it is done by a registered competent person or signed off by building control.

Roller garage doors with vision and vent laths in Burton upon Trent: questions

Do I need permission for a new roller garage door in Burton upon Trent?

Replacing a garage door is not usually development that needs planning permission in England, and widening the opening needs building control approval. If you live in a listed building, a conservation area or on an estate with covenants or planning conditions, check before ordering.

Can I get a price for Burton upon Trent without anyone visiting?

Yes. The guide price tool takes four steps and gives a range for your opening and door type. It is a guide, not a quote: the written quote comes after the survey or once the visit price is agreed.

What do you check at a survey in DE14?

At a survey in DE14 we measure the width and height of the opening, the headroom above it for the roller box, the side room for the guide rails and the floor level. We also look at the lintel and where power can come from for an electric door.

Is an electric roller door worth it for a garage in Burton upon Trent?

That depends on how often you use the garage. An electric door opens from the car with a remote and has safety devices fitted, while a manual door costs less and suits occasional use. We price both for your Burton upon Trent garage so you can compare.

Can I have vision laths on an electric roller door?

Yes. Vision and vent laths are part of the curtain, so they coil onto the barrel and run in the guides like the rest of the laths, whether the door is manual or electric. An electric door with vision laths is commissioned in the usual way, with the limits set and the safety edge or photocells tested.

Can vision laths be added to my existing roller door?

Vision and vent laths are built into the curtain when a new door is made, which is why we offer them as an extra on new doors. Changing laths in an existing curtain depends on finding compatible laths for that door, so if you want daylight or ventilation in your current garage, it's usually simplest to plan them into a replacement door.