Sizes, finishes and features · ST16

Roller garage doors with vision and vent laths in Stafford

Vision laths bring light into a windowless garage, and vent laths let air through, which can suit a garage in Stafford used as a workshop or store. We cover the ST16 area and agree the lath position at survey.

Get my guide price Call 0800 088 6248

Guide price: from £1,040 inc VAT
First step: Free survey
Covers: Stafford, ST16, ST17 and ST18
Area: Staffordshire

White roller garage door seen from inside with a band of perforated vision laths letting in daylight

Computer-generated image

What should I know about roller garage doors with vision and vent laths in Stafford?

Plan vision or vent laths into your order from the start, because they're built into the curtain when the door is made.
Check the agreed position of the laths in your written quote, and again on fitting day before the installer finishes.
Ask whether vision or vent laths are covered by the certificate if you're choosing a security-rated door model.
Consider the height you want the laths at, for example level with a workbench or higher up to keep the view in limited.

How does it work in Stafford?

When you're happy with the quote and accept it, we put the fitting date in writing, based on when an installer is available. The door, including its special laths, is only ordered after that acceptance.

STEP 01
Guide price
Answer four quick questions online and see a price range for your opening.
STEP 02
Free survey
We measure the opening, headroom, side room, lintel and power, and talk through options.
STEP 03
Written quote
You get the price inc VAT, what is included and the payment stages in writing.
STEP 04
Fitting day
Old door out, new door in, commissioned and handed over with the paperwork.

How much do roller garage doors with vision and vent laths cost in Stafford?

Item	Guide price (inc VAT)	Ex VAT
Manual roller door, single, with vision or vent laths	£1,040–£1,640	£866.67–£1,366.67 + VAT
Vision or vent laths (added to a new door)	£145–£345	£120.83–£287.50 + VAT

Guide prices for homes, last reviewed 25 October 2026. Your written quote is the price. See the full price list.

Covering Stafford and nearby

Stafford is within the area we cover in Staffordshire. Homes in ST16, ST17 and ST18 get the same survey, quote and fitting process as everywhere else we work.

Looking from a neighbouring town? We also cover Rugeley (8 miles) and Cannock (9 miles).

Rules that apply in Stafford

Electrics

An electric door needs a power supply near the roller box. Electrical work must meet BS 7671, and in England some domestic electrical work is notifiable under Part P, so it is done by a registered competent person or signed off by building control.

Structural work

Widening the opening, removing a central pier or fitting a new lintel is structural work that needs Building Regulations approval from building control before it starts.

Roller garage doors with vision and vent laths in Stafford: questions

Do you charge more for Stafford than other towns in Staffordshire?

No. Guide prices are the same for Stafford as for anywhere else we cover in Staffordshire. The written quote reflects your opening and the door you choose, not your postcode, apart from islands and remote areas where any travel cost is shown in advance.

What do you check at a survey in ST16?

At a survey in ST16 we measure the width and height of the opening, the headroom above it for the roller box, the side room for the guide rails and the floor level. We also look at the lintel and where power can come from for an electric door.

Do I need permission for a new roller garage door in Stafford?

Replacing a garage door is not usually development that needs planning permission in England, and widening the opening needs building control approval. If you live in a listed building, a conservation area or on an estate with covenants or planning conditions, check before ordering.

How long does it take to fit a roller garage door in Stafford?

Most single domestic roller doors are fitted in a day once the door has been made, including removing the old door. Wider doors, conversions that need building work and jobs where power has to be run can take longer; the quote says what to expect.

How do I clean vision laths?

Clean them gently, following the manufacturer's care guidance that comes with the door, and avoid abrasive cleaners or scourers that could scratch the see-through sections. Do it with the door closed and, on an electric door, make sure no one operates it while you're cleaning. Keep the guide rails clear of debris at the same time.

Can vision laths be added to my existing roller door?

Vision and vent laths are built into the curtain when a new door is made, which is why we offer them as an extra on new doors. Changing laths in an existing curtain depends on finding compatible laths for that door, so if you want daylight or ventilation in your current garage, it's usually simplest to plan them into a replacement door.