Sizes, finishes and features · NE8

Roller garage doors with vision and vent laths in Gateshead

Would some daylight or fresh air help in your garage in Gateshead? We supply and fit roller doors with vision or vent laths in Tyne and Wear, and you can see a guide price including the extra online before booking a free survey.

Get my guide price Call 0800 088 6248

Guide price: from £1,040 inc VAT
First step: Free survey
Covers: Gateshead, NE8, NE1 and NE2
Area: Tyne and Wear

White roller garage door seen from inside with a band of perforated vision laths letting in daylight

Computer-generated image

What should I know about roller garage doors with vision and vent laths in Gateshead?

Ask whether vision or vent laths are covered by the certificate if you're choosing a security-rated door model.
Plan vision or vent laths into your order from the start, because they're built into the curtain when the door is made.
Weigh up insulation if you're choosing insulated laths, as vent laths let air through and vision laths hold less heat.
Keep anything that must stay completely dry away from vent laths, as some moisture may get in during wet, windy weather.

How does it work in Gateshead?

When you're happy with the quote and accept it, we put the fitting date in writing, based on when an installer is available. The door, including its special laths, is only ordered after that acceptance.

STEP 01
Guide price
Answer four quick questions online and see a price range for your opening.
STEP 02
Free survey
We measure the opening, headroom, side room, lintel and power, and talk through options.
STEP 03
Written quote
You get the price inc VAT, what is included and the payment stages in writing.
STEP 04
Fitting day
Old door out, new door in, commissioned and handed over with the paperwork.

How much do roller garage doors with vision and vent laths cost in Gateshead?

Item	Guide price (inc VAT)	Ex VAT
Manual roller door, single, with vision or vent laths	£1,040–£1,640	£866.67–£1,366.67 + VAT
Vision or vent laths (added to a new door)	£145–£345	£120.83–£287.50 + VAT

Guide prices for homes, last reviewed 25 October 2026. Your written quote is the price. See the full price list.

Covering Gateshead and nearby

Gateshead is within the area we cover in Tyne and Wear. Homes in NE8, NE1 and NE2 get the same survey, quote and fitting process as everywhere else we work. Gateshead is about under a mile from Newcastle upon Tyne.

Nearby, we also take enquiries from Newcastle upon Tyne, Wallsend and Hebburn.

Rules that apply in Gateshead

Planning

Replacing a garage door is not usually development that needs planning permission. Check first if your home is listed (listed building consent covers works that affect its character), sits in a conservation area with an Article 4 direction, or is on an estate where planning conditions or covenants control garage doors.

Electrics

An electric door needs a power supply near the roller box. Electrical work must meet BS 7671, and in England some domestic electrical work is notifiable under Part P, so it is done by a registered competent person or signed off by building control.

Roller garage doors with vision and vent laths in Gateshead: questions

How long does it take to fit a roller garage door in Gateshead?

Most single domestic roller doors are fitted in a day once the door has been made, including removing the old door. Wider doors, conversions that need building work and jobs where power has to be run can take longer; the quote says what to expect.

Do you cover Gateshead?

Yes. Gateshead is part of the area we cover in Tyne and Wear, including NE8, NE1 and NE2. Get a guide price online, then we confirm a survey or visit date in writing. Dates depend on installer and engineer availability.

Is an electric roller door worth it for a garage in Gateshead?

That depends on how often you use the garage. An electric door opens from the car with a remote and has safety devices fitted, while a manual door costs less and suits occasional use. We price both for your Gateshead garage so you can compare.

What do you check at a survey in NE8?

At a survey in NE8 we measure the width and height of the opening, the headroom above it for the roller box, the side room for the guide rails and the floor level. We also look at the lintel and where power can come from for an electric door.

Can I have vision laths on an electric roller door?

Yes. Vision and vent laths are part of the curtain, so they coil onto the barrel and run in the guides like the rest of the laths, whether the door is manual or electric. An electric door with vision laths is commissioned in the usual way, with the limits set and the safety edge or photocells tested.

Do vent laths let rain or insects into the garage?

Vent laths have openings by design, so some air movement comes with them, and in very wet, windy weather a little moisture may get in. If you store things that must stay completely dry, keep them away from the door. Think about where the vent laths sit in the curtain, and discuss it at the survey before you decide.