Roller door types · SA73
Aluminium roller garage doors in Milford Haven
Aluminium roller doors for homes in Milford Haven start with a few measurements: width, height, headroom and side room. Enter them online for a guide price, and we'll arrange a free survey in Dyfed to check the opening properly before anything is ordered.
- Guide price
- from £895 inc VAT
- First step
- Free survey
- Covers
- Milford Haven, SA73
- Area
- Dyfed
Computer-generated image
What should I know about aluminium roller garage doors in Milford Haven?
- Check whether the garage floor is level across the opening, as the bottom rail of the curtain needs to sit evenly when the door closes.
- Decide whether the garage is just for parking and storage, where single-skin laths may be enough, or used as a room, where insulated laths make more sense.
- If you want an electric door, look for a socket or fused spur near the top of the opening where the control box will go.
- Check there is roughly 75 to 100 mm of solid wall on each side of the opening for the aluminium guide rails to fix to.
How does it work in Milford Haven?
We then arrange a free survey at your home in Milford Haven to measure the opening, headroom and side room and to check the lintel and power. You receive a written quote naming the exact door, lath and finish.
- STEP 01
Guide price
Answer four quick questions online and see a price range for your opening.
- STEP 02
Free survey
We measure the opening, headroom, side room, lintel and power, and talk through options.
- STEP 03
Written quote
You get the price inc VAT, what is included and the payment stages in writing.
- STEP 04
Fitting day
Old door out, new door in, commissioned and handed over with the paperwork.
How much do aluminium roller garage doors cost in Milford Haven?
| Item | Guide price (inc VAT) | Ex VAT |
|---|---|---|
| Electric single-skin roller door, single up to 2.4 m | £1,195–£1,745 | £995.83–£1,454.17 + VAT |
| Manual roller door, single opening up to 2.4 m | £895–£1,295 | £745.83–£1,079.17 + VAT |
| Insulated electric roller door, single up to 2.4 m | £1,495–£2,295 | £1,245.83–£1,912.50 + VAT |
Guide prices for homes, last reviewed 25 October 2026. Your written quote is the price. See the full price list.
Covering Milford Haven and nearby
Milford Haven is within the area we cover in Dyfed. Homes in SA73 get the same survey, quote and fitting process as everywhere else we work. Milford Haven lies around 33 miles from Carmarthen.
Rules that apply in Milford Haven
Structural work
Widening the opening, removing a central pier or fitting a new lintel is structural work that needs Building Regulations approval from building control in Wales before it starts.
Electrics
An electric door needs a power supply near the roller box. Electrical work must meet BS 7671, and in Wales some domestic electrical work is notifiable under Part P, so it is done by a registered competent person or signed off by building control.
Aluminium roller garage doors in Milford Haven: questions
What do you check at a survey in SA73?
At a survey in SA73 we measure the width and height of the opening, the headroom above it for the roller box, the side room for the guide rails and the floor level. We also look at the lintel and where power can come from for an electric door.
Can I get a price for Milford Haven without anyone visiting?
Yes. The guide price tool takes four steps and gives a range for your opening and door type. It is a guide, not a quote: the written quote comes after the survey or once the visit price is agreed.
How long does it take to fit a roller garage door in Milford Haven?
Most single domestic roller doors are fitted in a day once the door has been made, including removing the old door. Wider doors, conversions that need building work and jobs where power has to be run can take longer; the quote says what to expect.
Is the survey in Milford Haven really free?
Yes. For a new door, a replacement or a conversion, the survey is free and there is no obligation to go ahead. We measure the opening, check the lintel, headroom, side room and power, and send a written quote afterwards.
Can an aluminium roller door replace an up-and-over door?
Yes. We remove the old up-and-over door and its frame, or keep the frame if it's sound, then check the lintel and reveals before fitting the box behind the lintel and the guides to the reveals. Without swing-out arms you may gain a little clear width. Extra work, such as a new lintel or building out the reveals, is priced on survey.
How much room does an aluminium roller door take up inside the garage?
Very little. The curtain coils onto a barrel in a box at the top of the opening, so there are no ceiling tracks and nothing hangs across the roof space. You lose some height at the top for the box and a narrow strip at each side for the guide rails, both of which we measure at survey.
Other roller door services in Milford Haven
Insulated doors in Milford Haven
Steel doors in Milford Haven
Colours and woodgrain in Milford Haven
Replacement in Milford Haven
Remotes and keypads in Milford Haven
Double and wide doors in Milford Haven
Manual doors in Milford Haven
Low-headroom doors in Milford HavenAluminium roller garage doors in Milford Haven
See a guide price in four steps, then book a free survey.