Fitting, replacement and upgrades · TF3

Battery backup and safety upgrades in Telford

If the electric door on your garage in Telford has no photocells, or a worn safety edge, an upgrade visit can put that right. We cover homes in Shropshire, and any other parts the door needs are quoted before they're fitted.

Request a visit Call 0800 088 6248

Guide price: from £99 inc VAT
First step: Visit price agreed first
Covers: Telford, TF3, TF4 and TF2
Area: Shropshire

Roller door control box and battery backup unit mounted on a garage wall

Computer-generated image

What should I know about battery backup and safety upgrades in Telford?

After fitting, the door is tested to check it stops and reverses as it should with the new devices.
A battery backup unit lets the door run for a limited number of cycles when the mains power is off.
The battery charges from the mains while the power is on, so it's ready the next time there's a power cut.
Photocells mounted either side of the opening stop the door closing while anything is breaking the beam.

How does it work in Telford?

On the day, the upgrade is fitted and the door is tested. If anything else needs attention, the parts are quoted before they're fitted.

STEP 01
Tell us about the door
Describe the door and what you need, with a photo or video if you can.
STEP 02
Agree the visit price
We confirm the visit price before anyone comes out.
STEP 03
Visit
The engineer finds the cause and makes the door safe where possible.
STEP 04
Parts quoted first
Any parts are quoted before they are fitted, so you decide.

How much do battery backup and safety upgrades cost in Telford?

Item	Guide price (inc VAT)	Ex VAT
Battery backup unit, fitted to an existing electric door	£149–£279	£124.17–£232.50 + VAT
Safety edge replacement, fitted	£159–£295	£132.50–£245.83 + VAT
Photocell pair replacement, fitted	£99–£189	£82.50–£157.50 + VAT

Guide prices for homes, last reviewed 25 October 2026. Your written quote is the price. See the full price list.

Covering Telford and nearby

If your garage is in Telford (TF3, TF4 and TF2), you can get a guide price online now, and we confirm any survey or visit date in writing. For reference, Telford sits roughly 13 miles from Shrewsbury.

Other places close to Telford that we cover include Wellington, Bridgnorth and Shrewsbury.

Rules that apply in Telford

Powered door safety

Every powered door we fit is commissioned with force testing to BS EN 12453 and handed over with a Declaration of Conformity and UKCA or CE marking, as the Supply of Machinery (Safety) Regulations 2008 require.

Electrics

An electric door needs a power supply near the roller box. Electrical work must meet BS 7671, and in England some domestic electrical work is notifiable under Part P, so it is done by a registered competent person or signed off by building control.

Battery backup and safety upgrades in Telford: questions

Do you charge more for Telford than other towns in Shropshire?

No. Guide prices are the same for Telford as for anywhere else we cover in Shropshire. The written quote reflects your opening and the door you choose, not your postcode, apart from islands and remote areas where any travel cost is shown in advance.

Can I message you a photo of my garage in Telford?

Yes. Photos of the opening, the inside of the garage above the door and any existing door help us give a more useful guide price for Telford. Send them by WhatsApp or mention them in your enquiry, and we will reply in writing.

Can I get a price for Telford without anyone visiting?

Yes. The guide price tool takes four steps and gives a range for your opening and door type. It is a guide, not a quote: the written quote comes after the survey or once the visit price is agreed.

Do you cover Telford?

Yes. Telford is part of the area we cover in Shropshire, including TF3, TF4 and TF2. Get a guide price online, then we confirm a survey or visit date in writing. Dates depend on installer and engineer availability.

How often should I test the safety edge and photocells?

Test them monthly, following the manufacturer's instructions for your door. The aim is to confirm that the door stops or reverses when the safety edge meets an obstruction, and won't close while the photocell beam is broken. If either test fails, don't keep using the door until it has been checked, and request a visit.

Can safety devices be added to an older electric door?

Usually, if a compatible safety edge or photocells are available for the control box. Some older systems need extra wiring or a replacement control box first. Tell us what's on the control box label and we'll confirm whether it can be done, and the price, before booking the visit.