Low-headroom roller garage doors in Ramsgate

Replacing a garage door is not usually development that needs planning permission in England, and widening the opening needs building control approval. If you live in a listed building, a conservation area or on an estate with covenants or planning conditions, check before ordering.

Most single domestic roller doors are fitted in a day once the door has been made, including removing the old door. Wider doors, conversions that need building work and jobs where power has to be run can take longer; the quote says what to expect.

At a survey in CT11 we measure the width and height of the opening, the headroom above it for the roller box, the side room for the guide rails and the floor level. We also look at the lintel and where power can come from for an electric door.

That depends on how often you use the garage. An electric door opens from the car with a remote and has safety devices fitted, while a manual door costs less and suits occasional use. We price both for your Ramsgate garage so you can compare.

Often, yes. Insulated laths make a larger roll than single-skin laths of the same height, so the box is bigger. If that box won't fit behind the lintel, it can go under the lintel or in front of the wall. We'll show you the clear height you'd keep with each option, so you can decide whether insulation is worth the trade-off.

Sometimes that's the simplest answer. If a pipe, cable or light fitting sits just where the box needs to go, moving it may let the box go behind the lintel in the usual way. Any electrical changes should be made by a qualified electrician. We'll point out obstructions at survey and include any work we're doing in the written quote.