Sizes, finishes and features · CW1

Made-to-measure roller garage doors in Crewe

We can fit made-to-measure roller garage doors in Crewe and across CW1, from narrow single openings to wide doubles of about 5.5 m. Guide prices are set by width band, and the door itself is built to your exact surveyed sizes.

Get my guide price Call 0800 088 6248

Guide price: from £1,495 inc VAT
First step: Free survey
Covers: Crewe, CW1 and CW2
Area: Cheshire

Surveyor measuring the width of an empty garage opening with a tape measure

Computer-generated image

What should I know about made-to-measure roller garage doors in Crewe?

Have your rough measurements to hand when you request a guide price, even though the door is built to the survey sizes.
Check the clear wall either side of the opening, since the guide rails typically need around 75 to 100 mm each side.
Measure the width at the top, middle and bottom of the opening, because older garages are often slightly out of square.
Measure from the underside of the lintel to the ceiling or lowest obstruction, as that space decides the size and position of the box.

How does it work in Crewe?

When you accept the quote, the door is ordered to those sizes and your fitting date is confirmed in writing. The date depends on installer availability.

STEP 01
Guide price
Answer four quick questions online and see a price range for your opening.
STEP 02
Free survey
We measure the opening, headroom, side room, lintel and power, and talk through options.
STEP 03
Written quote
You get the price inc VAT, what is included and the payment stages in writing.
STEP 04
Fitting day
Old door out, new door in, commissioned and handed over with the paperwork.

How much do made-to-measure roller garage doors cost in Crewe?

Item	Guide price (inc VAT)	Ex VAT
Insulated electric roller door, single up to 2.4 m	£1,495–£2,295	£1,245.83–£1,912.50 + VAT
Insulated electric roller door, double 3.0–4.0 m	£2,195–£3,295	£1,829.17–£2,745.83 + VAT

Guide prices for homes, last reviewed 25 October 2026. Your written quote is the price. See the full price list.

Covering Crewe and nearby

Our coverage in Cheshire includes Crewe and the CW1 and CW2 postcode districts, so the same guide prices and written quotes apply here. Crewe is about 20 miles from Chester.

We also cover Winsford (7 miles), Kidsgrove (8 miles) and Congleton (10 miles).

Rules that apply in Crewe

Structural work

Widening the opening, removing a central pier or fitting a new lintel is structural work that needs Building Regulations approval from building control before it starts.

Planning

Replacing a garage door is not usually development that needs planning permission. Check first if your home is listed (listed building consent covers works that affect its character), sits in a conservation area with an Article 4 direction, or is on an estate where planning conditions or covenants control garage doors.

Made-to-measure roller garage doors in Crewe: questions

Do you charge more for Crewe than other towns in Cheshire?

No. Guide prices are the same for Crewe as for anywhere else we cover in Cheshire. The written quote reflects your opening and the door you choose, not your postcode, apart from islands and remote areas where any travel cost is shown in advance.

Is the survey in Crewe really free?

Yes. For a new door, a replacement or a conversion, the survey is free and there is no obligation to go ahead. We measure the opening, check the lintel, headroom, side room and power, and send a written quote afterwards.

How long does it take to fit a roller garage door in Crewe?

Most single domestic roller doors are fitted in a day once the door has been made, including removing the old door. Wider doors, conversions that need building work and jobs where power has to be run can take longer; the quote says what to expect.

Can I message you a photo of my garage in Crewe?

Yes. Photos of the opening, the inside of the garage above the door and any existing door help us give a more useful guide price for Crewe. Send them by WhatsApp or mention them in your enquiry, and we will reply in writing.

Can I choose the finish and extras on a made-to-measure door?

Yes. Alongside the sizes, you can choose the lath type, a RAL colour or woodgrain finish, vision or vent laths, and for electric doors extras such as a wireless keypad, smart app control or battery backup. Each choice is written into your quote with its price, so the door that's ordered matches exactly what you agreed.

Can I order a made-to-measure door without a survey?

We don't order doors from customer measurements alone. The door is built to sizes taken at our free survey, where we also check the lintel, headroom, floor and power. That way, if the door doesn't fit, getting the sizes right is our job, not yours. Your own measurements are still useful for the online guide price before the survey.