Roller door types · CW1
Manual roller garage doors in Crewe
Manual roller doors are the lowest-cost route to a roller garage door, and we can fit them in Crewe and throughout CW1. Each price includes removing your old roller or up-and-over door, and a free survey confirms the measurements first.
- Guide price
- from £895 inc VAT
- First step
- Free survey
- Covers
- Crewe, CW1 and CW2
- Area
- Cheshire
Computer-generated image
What should I know about manual roller garage doors in Crewe?
- If the door is for a lock-up or garage court, list each opening separately, as every door is measured and priced for its own opening.
- Check the floor across the opening is level, because the bottom rail needs to sit evenly for the lock to engage properly.
- Think about who will open the door and how often, since a manual curtain has to be lifted and pulled down by hand every time.
- Measure the headroom above the opening, as the coiled curtain still needs a box at the top even without a motor.
How does it work in Crewe?
We then book a free survey in Crewe to measure the headroom and side room and to check the lintel and floor. You get a written quote showing the door, finish and total price with VAT.
- STEP 01
Guide price
Answer four quick questions online and see a price range for your opening.
- STEP 02
Free survey
We measure the opening, headroom, side room, lintel and power, and talk through options.
- STEP 03
Written quote
You get the price inc VAT, what is included and the payment stages in writing.
- STEP 04
Fitting day
Old door out, new door in, commissioned and handed over with the paperwork.
How much do manual roller garage doors cost in Crewe?
| Item | Guide price (inc VAT) | Ex VAT |
|---|---|---|
| Manual roller door, single opening up to 2.4 m | £895–£1,295 | £745.83–£1,079.17 + VAT |
| Manual roller door, wide single 2.4–3.0 m | £1,095–£1,545 | £912.50–£1,287.50 + VAT |
| Manual roller door, double 3.0–4.0 m | £1,395–£1,995 | £1,162.50–£1,662.50 + VAT |
Guide prices for homes, last reviewed 25 October 2026. Your written quote is the price. See the full price list.
Covering Crewe and nearby
We survey and fit roller garage doors across Crewe, including CW1 and CW2, as part of our coverage in Cheshire. For reference, Crewe sits roughly 20 miles from Chester.
We also cover Winsford (7 miles), Kidsgrove (8 miles) and Congleton (10 miles).
Rules that apply in Crewe
Electrics
An electric door needs a power supply near the roller box. Electrical work must meet BS 7671, and in England some domestic electrical work is notifiable under Part P, so it is done by a registered competent person or signed off by building control.
Planning
Replacing a garage door is not usually development that needs planning permission. Check first if your home is listed (listed building consent covers works that affect its character), sits in a conservation area with an Article 4 direction, or is on an estate where planning conditions or covenants control garage doors.
Manual roller garage doors in Crewe: questions
How much do manual roller garage doors cost in Crewe?
Our guide price for manual roller garage doors is from £895 inc VAT. The figure for your garage depends on the opening size, the door specification and any extras, and is confirmed in a written quote after a free survey. The guide prices are the same in Crewe as elsewhere we cover.
Do you cover Crewe?
Yes. Crewe is part of the area we cover in Cheshire, including CW1 and CW2. Get a guide price online, then we confirm a survey or visit date in writing. Dates depend on installer and engineer availability.
Do you charge more for Crewe than other towns in Cheshire?
No. Guide prices are the same for Crewe as for anywhere else we cover in Cheshire. The written quote reflects your opening and the door you choose, not your postcode, apart from islands and remote areas where any travel cost is shown in advance.
What do you check at a survey in CW1?
At a survey in CW1 we measure the width and height of the opening, the headroom above it for the roller box, the side room for the guide rails and the floor level. We also look at the lintel and where power can come from for an electric door.
Can I fit a manual roller door to a garage with no electricity?
Yes, and that's one of its main advantages. A manual door needs no motor, no control box and no power supply, so it suits detached garages, lock-ups and outbuildings without electrics. If you want an electric door there later, a qualified electrician would need to provide a fused spur, which adds cost and depends on getting a supply to the garage.
Do manual roller doors need servicing?
They need less attention than an electric door, but basic care still helps. Keep the guide rails free of leaves and grit, and only use the lubricant the manufacturer recommends, as many doors shouldn't have oil on the guides. If the door becomes heavy to lift, drops on its own or runs unevenly, stop using it and ask for a visit, priced and agreed beforehand.
Other roller door services in Crewe
Aluminium doors in Crewe
Electric doors in Crewe
Manual to electric in Crewe
Up-and-over conversion in Crewe
Installation in Crewe
Made-to-measure doors in Crewe
Stuck door repair in Crewe
Remotes and keypads in CreweManual roller garage doors in Crewe
See a guide price in four steps, then book a free survey.