Sizes, finishes and features · LL29

Made-to-measure roller garage doors in Colwyn Bay

We can fit made-to-measure roller garage doors in Colwyn Bay and across LL29, from narrow single openings to wide doubles of about 5.5 m. Guide prices are set by width band, and the door itself is built to your exact surveyed sizes.

Get my guide price Call 0800 088 6248

Guide price: from £1,495 inc VAT
First step: Free survey
Covers: Colwyn Bay, LL29 and LL28
Area: Clwyd

Surveyor measuring the width of an empty garage opening with a tape measure

Computer-generated image

What should I know about made-to-measure roller garage doors in Colwyn Bay?

Measure the width at the top, middle and bottom of the opening, because older garages are often slightly out of square.
Note any piers, downpipes or meter boxes outside the opening that could affect a face-fixed door or box.
Read the sizes, fitting position and box position in your written quote carefully, because that's what the door will be made to.
Look for pipes, cables or lights near the top of the opening inside, because they may need moving to make room for the box.

How does it work in Colwyn Bay?

Enter your rough measurements in the online quote tool to see a guide price for your width band. That figure already covers fitting and disposal of the door you're replacing.

STEP 01
Guide price
Answer four quick questions online and see a price range for your opening.
STEP 02
Free survey
We measure the opening, headroom, side room, lintel and power, and talk through options.
STEP 03
Written quote
You get the price inc VAT, what is included and the payment stages in writing.
STEP 04
Fitting day
Old door out, new door in, commissioned and handed over with the paperwork.

How much do made-to-measure roller garage doors cost in Colwyn Bay?

Item	Guide price (inc VAT)	Ex VAT
Insulated electric roller door, single up to 2.4 m	£1,495–£2,295	£1,245.83–£1,912.50 + VAT
Insulated electric roller door, double 3.0–4.0 m	£2,195–£3,295	£1,829.17–£2,745.83 + VAT

Guide prices for homes, last reviewed 25 October 2026. Your written quote is the price. See the full price list.

Covering Colwyn Bay and nearby

We survey and fit roller garage doors across Colwyn Bay, including LL29 and LL28, as part of our coverage in Clwyd. Colwyn Bay lies around 35 miles from Wrexham.

Looking from a neighbouring town? We also cover Llandudno (5 miles) and Rhyl (10 miles).

Rules that apply in Colwyn Bay

Structural work

Widening the opening, removing a central pier or fitting a new lintel is structural work that needs Building Regulations approval from building control in Wales before it starts.

Planning

Replacing a garage door is not usually development that needs planning permission in Wales. Check first if your home is listed (listed building consent covers works that affect its character), is in a conservation area with an Article 4 direction, or is on an estate where planning conditions or covenants control garage doors.

Made-to-measure roller garage doors in Colwyn Bay: questions

Is an electric roller door worth it for a garage in Colwyn Bay?

That depends on how often you use the garage. An electric door opens from the car with a remote and has safety devices fitted, while a manual door costs less and suits occasional use. We price both for your Colwyn Bay garage so you can compare.

Do you charge more for Colwyn Bay than other towns in Clwyd?

No. Guide prices are the same for Colwyn Bay as for anywhere else we cover in Clwyd. The written quote reflects your opening and the door you choose, not your postcode, apart from islands and remote areas where any travel cost is shown in advance.

Do you cover Colwyn Bay?

Yes. Colwyn Bay is part of the area we cover in Clwyd, including LL29 and LL28. Get a guide price online, then we confirm a survey or visit date in writing. Dates depend on installer and engineer availability.

Can you remove my old garage door in Colwyn Bay?

Yes. Every door price includes removing and disposing of an old roller or up-and-over door at your Colwyn Bay address, along with standard fixings and making good to the reveals. If the frame or lintel needs work, we price it at the survey before you agree.

Why might my measurements differ from the surveyor's?

Openings are rarely perfectly square, so width and height often vary by a few millimetres from one point to another. The surveyor measures at several points, checks the floor level and works to the figures the door must fit. Small differences from your own measurements are normal, and the written quote is based on the survey.

What if my opening is narrower than a typical garage door?

Narrow openings are fine, because the door is built to your width. Side room is the main thing to check, since each guide rail needs some clear wall beside the opening. If the opening is narrow and you'd like as much clear width as possible, we'll explain how each fitting position affects the space you'll have for the car.