Sizes, finishes and features · BT66

Made-to-measure roller garage doors in Lurgan

We can fit made-to-measure roller garage doors in Lurgan and across BT66, from narrow single openings to wide doubles of about 5.5 m. Guide prices are set by width band, and the door itself is built to your exact surveyed sizes.

Get my guide price Call 0800 088 6248

Guide price: from £1,495 inc VAT
First step: Free survey
Covers: Lurgan, BT66, BT65 and BT64
Area: County Armagh

Surveyor measuring the width of an empty garage opening with a tape measure

Computer-generated image

What should I know about made-to-measure roller garage doors in Lurgan?

Measure the width at the top, middle and bottom of the opening, because older garages are often slightly out of square.
Measure from the underside of the lintel to the ceiling or lowest obstruction, as that space decides the size and position of the box.
Read the sizes, fitting position and box position in your written quote carefully, because that's what the door will be made to.
Check the height at both sides and in the middle, since an uneven floor can make one side of the opening taller than the other.

How does it work in Lurgan?

When you accept the quote, the door is ordered to those sizes and your fitting date is confirmed in writing. The date depends on installer availability.

STEP 01
Guide price
Answer four quick questions online and see a price range for your opening.
STEP 02
Free survey
We measure the opening, headroom, side room, lintel and power, and talk through options.
STEP 03
Written quote
You get the price inc VAT, what is included and the payment stages in writing.
STEP 04
Fitting day
Old door out, new door in, commissioned and handed over with the paperwork.

How much do made-to-measure roller garage doors cost in Lurgan?

Item	Guide price (inc VAT)	Ex VAT
Insulated electric roller door, single up to 2.4 m	£1,495–£2,295	£1,245.83–£1,912.50 + VAT
Insulated electric roller door, double 3.0–4.0 m	£2,195–£3,295	£1,829.17–£2,745.83 + VAT

Guide prices for homes, last reviewed 25 October 2026. Your written quote is the price. See the full price list.

Covering Lurgan and nearby

We survey and fit roller garage doors across Lurgan, including BT66, BT65 and BT64, as part of our coverage in County Armagh. Lurgan is about 16 miles from Armagh.

Other places close to Lurgan that we cover include Craigavon, Portadown and Banbridge.

Rules that apply in Lurgan

Structural work

Structural alterations, such as widening the opening or fitting a new lintel, need building control approval from your council under the Building Regulations (Northern Ireland) 2012 before work starts.

Planning

Replacing a garage door is not usually development that needs planning permission in Northern Ireland. Listed building consent applies to listed buildings, and conservation-area controls, planning conditions or covenants can restrict changes to how a garage looks, so check before ordering.

Made-to-measure roller garage doors in Lurgan: questions

Can I get a price for Lurgan without anyone visiting?

Yes. The guide price tool takes four steps and gives a range for your opening and door type. It is a guide, not a quote: the written quote comes after the survey or once the visit price is agreed.

Can you remove my old garage door in Lurgan?

Yes. Every door price includes removing and disposing of an old roller or up-and-over door at your Lurgan address, along with standard fixings and making good to the reveals. If the frame or lintel needs work, we price it at the survey before you agree.

How much do made-to-measure roller garage doors cost in Lurgan?

Our guide price for made-to-measure roller garage doors is from £1,495 inc VAT. The figure for your garage depends on the opening size, the door specification and any extras, and is confirmed in a written quote after a free survey. The guide prices are the same in Lurgan as elsewhere we cover.

Do you cover Lurgan?

Yes. Lurgan is part of the area we cover in County Armagh, including BT66, BT65 and BT64. Get a guide price online, then we confirm a survey or visit date in writing. Dates depend on installer and engineer availability.

Why might my measurements differ from the surveyor's?

Openings are rarely perfectly square, so width and height often vary by a few millimetres from one point to another. The surveyor measures at several points, checks the floor level and works to the figures the door must fit. Small differences from your own measurements are normal, and the written quote is based on the survey.

Can I order a made-to-measure door without a survey?

We don't order doors from customer measurements alone. The door is built to sizes taken at our free survey, where we also check the lintel, headroom, floor and power. That way, if the door doesn't fit, getting the sizes right is our job, not yours. Your own measurements are still useful for the online guide price before the survey.