Sizes, finishes and features · DL14

Made-to-measure roller garage doors in Bishop Auckland

Every roller garage door we fit in Bishop Auckland is built to the measurements taken at your free survey. Enter rough sizes online for a guide price, and we'll measure properly in County Durham before anything is ordered.

Get my guide price Call 0800 088 6248

Guide price: from £1,495 inc VAT
First step: Free survey
Covers: Bishop Auckland, DL14 and DL4
Area: County Durham

Surveyor measuring the width of an empty garage opening with a tape measure

Computer-generated image

What should I know about made-to-measure roller garage doors in Bishop Auckland?

Check the clear wall either side of the opening, since the guide rails typically need around 75 to 100 mm each side.
Note any piers, downpipes or meter boxes outside the opening that could affect a face-fixed door or box.
Read the sizes, fitting position and box position in your written quote carefully, because that's what the door will be made to.
Have your rough measurements to hand when you request a guide price, even though the door is built to the survey sizes.

How does it work in Bishop Auckland?

When you accept the quote, the door is ordered to those sizes and your fitting date is confirmed in writing. The date depends on installer availability.

STEP 01
Guide price
Answer four quick questions online and see a price range for your opening.
STEP 02
Free survey
We measure the opening, headroom, side room, lintel and power, and talk through options.
STEP 03
Written quote
You get the price inc VAT, what is included and the payment stages in writing.
STEP 04
Fitting day
Old door out, new door in, commissioned and handed over with the paperwork.

How much do made-to-measure roller garage doors cost in Bishop Auckland?

Item	Guide price (inc VAT)	Ex VAT
Insulated electric roller door, single up to 2.4 m	£1,495–£2,295	£1,245.83–£1,912.50 + VAT
Insulated electric roller door, double 3.0–4.0 m	£2,195–£3,295	£1,829.17–£2,745.83 + VAT

Guide prices for homes, last reviewed 25 October 2026. Your written quote is the price. See the full price list.

Covering Bishop Auckland and nearby

Our coverage in County Durham includes Bishop Auckland and the DL14 and DL4 postcode districts, so the same guide prices and written quotes apply here. Bishop Auckland lies around 9 miles from Durham.

We also cover Newton Aycliffe (5 miles), Durham (9 miles) and Darlington (10 miles).

Rules that apply in Bishop Auckland

Structural work

Widening the opening, removing a central pier or fitting a new lintel is structural work that needs Building Regulations approval from building control before it starts.

Planning

Replacing a garage door is not usually development that needs planning permission. Check first if your home is listed (listed building consent covers works that affect its character), sits in a conservation area with an Article 4 direction, or is on an estate where planning conditions or covenants control garage doors.

Made-to-measure roller garage doors in Bishop Auckland: questions

What do you check at a survey in DL14?

At a survey in DL14 we measure the width and height of the opening, the headroom above it for the roller box, the side room for the guide rails and the floor level. We also look at the lintel and where power can come from for an electric door.

Can I get a price for Bishop Auckland without anyone visiting?

Yes. The guide price tool takes four steps and gives a range for your opening and door type. It is a guide, not a quote: the written quote comes after the survey or once the visit price is agreed.

Can I message you a photo of my garage in Bishop Auckland?

Yes. Photos of the opening, the inside of the garage above the door and any existing door help us give a more useful guide price for Bishop Auckland. Send them by WhatsApp or mention them in your enquiry, and we will reply in writing.

Do I need permission for a new roller garage door in Bishop Auckland?

Replacing a garage door is not usually development that needs planning permission in England, and widening the opening needs building control approval. If you live in a listed building, a conservation area or on an estate with covenants or planning conditions, check before ordering.

Can I order a made-to-measure door without a survey?

We don't order doors from customer measurements alone. The door is built to sizes taken at our free survey, where we also check the lintel, headroom, floor and power. That way, if the door doesn't fit, getting the sizes right is our job, not yours. Your own measurements are still useful for the online guide price before the survey.

Why might my measurements differ from the surveyor's?

Openings are rarely perfectly square, so width and height often vary by a few millimetres from one point to another. The surveyor measures at several points, checks the floor level and works to the figures the door must fit. Small differences from your own measurements are normal, and the written quote is based on the survey.