Sizes, finishes and features · DL5

Made-to-measure roller garage doors in Newton Aycliffe

Every roller garage door we fit in Newton Aycliffe is built to the measurements taken at your free survey. Enter rough sizes online for a guide price, and we'll measure properly in County Durham before anything is ordered.

Get my guide price Call 0800 088 6248

Guide price: from £1,495 inc VAT
First step: Free survey
Covers: Newton Aycliffe, DL5 and DL4
Area: County Durham

Surveyor measuring the width of an empty garage opening with a tape measure

Computer-generated image

What should I know about made-to-measure roller garage doors in Newton Aycliffe?

Check the height at both sides and in the middle, since an uneven floor can make one side of the opening taller than the other.
Look for pipes, cables or lights near the top of the opening inside, because they may need moving to make room for the box.
Measure from the underside of the lintel to the ceiling or lowest obstruction, as that space decides the size and position of the box.
Have your rough measurements to hand when you request a guide price, even though the door is built to the survey sizes.

How does it work in Newton Aycliffe?

At a free survey in Newton Aycliffe, we take the exact measurements the door will be built to and check the lintel, floor and power. The written quote records the sizes, positions and finish.

STEP 01
Guide price
Answer four quick questions online and see a price range for your opening.
STEP 02
Free survey
We measure the opening, headroom, side room, lintel and power, and talk through options.
STEP 03
Written quote
You get the price inc VAT, what is included and the payment stages in writing.
STEP 04
Fitting day
Old door out, new door in, commissioned and handed over with the paperwork.

How much do made-to-measure roller garage doors cost in Newton Aycliffe?

Item	Guide price (inc VAT)	Ex VAT
Insulated electric roller door, single up to 2.4 m	£1,495–£2,295	£1,245.83–£1,912.50 + VAT
Insulated electric roller door, double 3.0–4.0 m	£2,195–£3,295	£1,829.17–£2,745.83 + VAT

Guide prices for homes, last reviewed 25 October 2026. Your written quote is the price. See the full price list.

Covering Newton Aycliffe and nearby

Our coverage in County Durham includes Newton Aycliffe and the DL5 and DL4 postcode districts, so the same guide prices and written quotes apply here. Newton Aycliffe is about 11 miles from Durham.

We also cover Bishop Auckland (5 miles), Darlington (7 miles) and Stockton-on-Tees (11 miles).

Rules that apply in Newton Aycliffe

Structural work

Widening the opening, removing a central pier or fitting a new lintel is structural work that needs Building Regulations approval from building control before it starts.

Planning

Replacing a garage door is not usually development that needs planning permission. Check first if your home is listed (listed building consent covers works that affect its character), sits in a conservation area with an Article 4 direction, or is on an estate where planning conditions or covenants control garage doors.

Made-to-measure roller garage doors in Newton Aycliffe: questions

How long does it take to fit a roller garage door in Newton Aycliffe?

Most single domestic roller doors are fitted in a day once the door has been made, including removing the old door. Wider doors, conversions that need building work and jobs where power has to be run can take longer; the quote says what to expect.

Do I need permission for a new roller garage door in Newton Aycliffe?

Replacing a garage door is not usually development that needs planning permission in England, and widening the opening needs building control approval. If you live in a listed building, a conservation area or on an estate with covenants or planning conditions, check before ordering.

Is the survey in Newton Aycliffe really free?

Yes. For a new door, a replacement or a conversion, the survey is free and there is no obligation to go ahead. We measure the opening, check the lintel, headroom, side room and power, and send a written quote afterwards.

What do you check at a survey in DL5?

At a survey in DL5 we measure the width and height of the opening, the headroom above it for the roller box, the side room for the guide rails and the floor level. We also look at the lintel and where power can come from for an electric door.

Why might my measurements differ from the surveyor's?

Openings are rarely perfectly square, so width and height often vary by a few millimetres from one point to another. The surveyor measures at several points, checks the floor level and works to the figures the door must fit. Small differences from your own measurements are normal, and the written quote is based on the survey.

What if my opening is narrower than a typical garage door?

Narrow openings are fine, because the door is built to your width. Side room is the main thing to check, since each guide rail needs some clear wall beside the opening. If the opening is narrow and you'd like as much clear width as possible, we'll explain how each fitting position affects the space you'll have for the car.