Sizes, finishes and features · DE11

Made-to-measure roller garage doors in Swadlincote

Every roller garage door we fit in Swadlincote is built to the measurements taken at your free survey. Enter rough sizes online for a guide price, and we'll measure properly in Derbyshire before anything is ordered.

Get my guide price Call 0800 088 6248

Guide price: from £1,495 inc VAT
First step: Free survey
Covers: Swadlincote, DE11 and DE15
Area: Derbyshire

Surveyor measuring the width of an empty garage opening with a tape measure

Computer-generated image

What should I know about made-to-measure roller garage doors in Swadlincote?

Note any piers, downpipes or meter boxes outside the opening that could affect a face-fixed door or box.
Have your rough measurements to hand when you request a guide price, even though the door is built to the survey sizes.
Check the clear wall either side of the opening, since the guide rails typically need around 75 to 100 mm each side.
Look for pipes, cables or lights near the top of the opening inside, because they may need moving to make room for the box.

How does it work in Swadlincote?

Enter your rough measurements in the online quote tool to see a guide price for your width band. That figure already covers fitting and disposal of the door you're replacing.

STEP 01
Guide price
Answer four quick questions online and see a price range for your opening.
STEP 02
Free survey
We measure the opening, headroom, side room, lintel and power, and talk through options.
STEP 03
Written quote
You get the price inc VAT, what is included and the payment stages in writing.
STEP 04
Fitting day
Old door out, new door in, commissioned and handed over with the paperwork.

How much do made-to-measure roller garage doors cost in Swadlincote?

Item	Guide price (inc VAT)	Ex VAT
Insulated electric roller door, single up to 2.4 m	£1,495–£2,295	£1,245.83–£1,912.50 + VAT
Insulated electric roller door, double 3.0–4.0 m	£2,195–£3,295	£1,829.17–£2,745.83 + VAT

Guide prices for homes, last reviewed 25 October 2026. Your written quote is the price. See the full price list.

Covering Swadlincote and nearby

We survey and fit roller garage doors across Swadlincote, including DE11 and DE15, as part of our coverage in Derbyshire. Swadlincote lies around 11 miles from Derby.

We also cover Burton upon Trent (4 miles), Coalville (9 miles) and Derby (11 miles).

Rules that apply in Swadlincote

Structural work

Widening the opening, removing a central pier or fitting a new lintel is structural work that needs Building Regulations approval from building control before it starts.

Planning

Replacing a garage door is not usually development that needs planning permission. Check first if your home is listed (listed building consent covers works that affect its character), sits in a conservation area with an Article 4 direction, or is on an estate where planning conditions or covenants control garage doors.

Made-to-measure roller garage doors in Swadlincote: questions

Can I message you a photo of my garage in Swadlincote?

Yes. Photos of the opening, the inside of the garage above the door and any existing door help us give a more useful guide price for Swadlincote. Send them by WhatsApp or mention them in your enquiry, and we will reply in writing.

What do you check at a survey in DE11?

At a survey in DE11 we measure the width and height of the opening, the headroom above it for the roller box, the side room for the guide rails and the floor level. We also look at the lintel and where power can come from for an electric door.

Do you charge more for Swadlincote than other towns in Derbyshire?

No. Guide prices are the same for Swadlincote as for anywhere else we cover in Derbyshire. The written quote reflects your opening and the door you choose, not your postcode, apart from islands and remote areas where any travel cost is shown in advance.

Do you cover Swadlincote?

Yes. Swadlincote is part of the area we cover in Derbyshire, including DE11 and DE15. Get a guide price online, then we confirm a survey or visit date in writing. Dates depend on installer and engineer availability.

Why might my measurements differ from the surveyor's?

Openings are rarely perfectly square, so width and height often vary by a few millimetres from one point to another. The surveyor measures at several points, checks the floor level and works to the figures the door must fit. Small differences from your own measurements are normal, and the written quote is based on the survey.

Can I choose the finish and extras on a made-to-measure door?

Yes. Alongside the sizes, you can choose the lath type, a RAL colour or woodgrain finish, vision or vent laths, and for electric doors extras such as a wireless keypad, smart app control or battery backup. Each choice is written into your quote with its price, so the door that's ordered matches exactly what you agreed.