Sizes, finishes and features · DD7

Made-to-measure roller garage doors in Carnoustie

For a made-to-measure roller door in Carnoustie, start with four measurements: width, height, headroom and side room. They give you a guide price online, and a free survey in Dundee and Angus turns them into exact order sizes.

Get my guide price Call 0800 088 6248

Guide price: from £1,495 inc VAT
First step: Free survey
Covers: Carnoustie, DD7
Area: Dundee and Angus

Surveyor measuring the width of an empty garage opening with a tape measure

Computer-generated image

What should I know about made-to-measure roller garage doors in Carnoustie?

Have your rough measurements to hand when you request a guide price, even though the door is built to the survey sizes.
Measure from the underside of the lintel to the ceiling or lowest obstruction, as that space decides the size and position of the box.
Measure the width at the top, middle and bottom of the opening, because older garages are often slightly out of square.
Check the height at both sides and in the middle, since an uneven floor can make one side of the opening taller than the other.

How does it work in Carnoustie?

Enter your rough measurements in the online quote tool to see a guide price for your width band. That figure already covers fitting and disposal of the door you're replacing.

STEP 01
Guide price
Answer four quick questions online and see a price range for your opening.
STEP 02
Free survey
We measure the opening, headroom, side room, lintel and power, and talk through options.
STEP 03
Written quote
You get the price inc VAT, what is included and the payment stages in writing.
STEP 04
Fitting day
Old door out, new door in, commissioned and handed over with the paperwork.

How much do made-to-measure roller garage doors cost in Carnoustie?

Item	Guide price (inc VAT)	Ex VAT
Insulated electric roller door, single up to 2.4 m	£1,495–£2,295	£1,245.83–£1,912.50 + VAT
Insulated electric roller door, double 3.0–4.0 m	£2,195–£3,295	£1,829.17–£2,745.83 + VAT

Guide prices for homes, last reviewed 25 October 2026. Your written quote is the price. See the full price list.

Covering Carnoustie and nearby

If your garage is in Carnoustie (DD7), you can get a guide price online now, and we confirm any survey or visit date in writing. For reference, Carnoustie sits roughly 10 miles from Dundee.

We also cover Arbroath (6 miles), Dundee (10 miles) and St Andrews (12 miles).

Rules that apply in Carnoustie

Structural work

Structural alterations, such as widening the opening or fitting a new lintel, need a building warrant from the local authority before work starts.

Planning

Replacing a garage door is not usually development that needs planning permission in Scotland. Listed building consent applies to listed buildings, and conservation-area controls, planning conditions or title conditions can restrict changes to how a garage looks, so check before ordering.

Made-to-measure roller garage doors in Carnoustie: questions

Is the survey in Carnoustie really free?

Yes. For a new door, a replacement or a conversion, the survey is free and there is no obligation to go ahead. We measure the opening, check the lintel, headroom, side room and power, and send a written quote afterwards.

What do you check at a survey in DD7?

At a survey in DD7 we measure the width and height of the opening, the headroom above it for the roller box, the side room for the guide rails and the floor level. We also look at the lintel and where power can come from for an electric door.

Do I need permission for a new roller garage door in Carnoustie?

Replacing a garage door is not usually development that needs planning permission in Scotland, and widening the opening needs a building warrant. If you live in a listed building, a conservation area or on an estate with covenants or planning conditions, check before ordering.

How long does it take to fit a roller garage door in Carnoustie?

Most single domestic roller doors are fitted in a day once the door has been made, including removing the old door. Wider doors, conversions that need building work and jobs where power has to be run can take longer; the quote says what to expect.

Why might my measurements differ from the surveyor's?

Openings are rarely perfectly square, so width and height often vary by a few millimetres from one point to another. The surveyor measures at several points, checks the floor level and works to the figures the door must fit. Small differences from your own measurements are normal, and the written quote is based on the survey.

Can I order a made-to-measure door without a survey?

We don't order doors from customer measurements alone. The door is built to sizes taken at our free survey, where we also check the lintel, headroom, floor and power. That way, if the door doesn't fit, getting the sizes right is our job, not yours. Your own measurements are still useful for the online guide price before the survey.