Sizes, finishes and features · CM14
Made-to-measure roller garage doors in Brentwood
Every roller garage door we fit in Brentwood is built to the measurements taken at your free survey. Enter rough sizes online for a guide price, and we'll measure properly in Essex before anything is ordered.
- Guide price
- from £1,495 inc VAT
- First step
- Free survey
- Covers
- Brentwood, CM14, CM13 and CM15
- Area
- Essex
Computer-generated image
What should I know about made-to-measure roller garage doors in Brentwood?
- Check the clear wall either side of the opening, since the guide rails typically need around 75 to 100 mm each side.
- Measure the width at the top, middle and bottom of the opening, because older garages are often slightly out of square.
- Check the height at both sides and in the middle, since an uneven floor can make one side of the opening taller than the other.
- Measure from the underside of the lintel to the ceiling or lowest obstruction, as that space decides the size and position of the box.
How does it work in Brentwood?
When you accept the quote, the door is ordered to those sizes and your fitting date is confirmed in writing. The date depends on installer availability.
- STEP 01
Guide price
Answer four quick questions online and see a price range for your opening.
- STEP 02
Free survey
We measure the opening, headroom, side room, lintel and power, and talk through options.
- STEP 03
Written quote
You get the price inc VAT, what is included and the payment stages in writing.
- STEP 04
Fitting day
Old door out, new door in, commissioned and handed over with the paperwork.
How much do made-to-measure roller garage doors cost in Brentwood?
| Item | Guide price (inc VAT) | Ex VAT |
|---|---|---|
| Insulated electric roller door, single up to 2.4 m | £1,495–£2,295 | £1,245.83–£1,912.50 + VAT |
| Insulated electric roller door, double 3.0–4.0 m | £2,195–£3,295 | £1,829.17–£2,745.83 + VAT |
Guide prices for homes, last reviewed 25 October 2026. Your written quote is the price. See the full price list.
Covering Brentwood and nearby
Brentwood is within the area we cover in Essex. Homes in CM14, CM13 and CM15 get the same survey, quote and fitting process as everywhere else we work. For reference, Brentwood sits roughly 11 miles from Chelmsford.
Looking from a neighbouring town? We also cover Billericay (5 miles) and Hornchurch (6 miles).
Rules that apply in Brentwood
Structural work
Widening the opening, removing a central pier or fitting a new lintel is structural work that needs Building Regulations approval from building control before it starts.
Planning
Replacing a garage door is not usually development that needs planning permission. Check first if your home is listed (listed building consent covers works that affect its character), sits in a conservation area with an Article 4 direction, or is on an estate where planning conditions or covenants control garage doors.
Made-to-measure roller garage doors in Brentwood: questions
Do you cover Brentwood?
Yes. Brentwood is part of the area we cover in Essex, including CM14, CM13 and CM15. Get a guide price online, then we confirm a survey or visit date in writing. Dates depend on installer and engineer availability.
Can you remove my old garage door in Brentwood?
Yes. Every door price includes removing and disposing of an old roller or up-and-over door at your Brentwood address, along with standard fixings and making good to the reveals. If the frame or lintel needs work, we price it at the survey before you agree.
Can I message you a photo of my garage in Brentwood?
Yes. Photos of the opening, the inside of the garage above the door and any existing door help us give a more useful guide price for Brentwood. Send them by WhatsApp or mention them in your enquiry, and we will reply in writing.
Is the survey in Brentwood really free?
Yes. For a new door, a replacement or a conversion, the survey is free and there is no obligation to go ahead. We measure the opening, check the lintel, headroom, side room and power, and send a written quote afterwards.
What if my opening is narrower than a typical garage door?
Narrow openings are fine, because the door is built to your width. Side room is the main thing to check, since each guide rail needs some clear wall beside the opening. If the opening is narrow and you'd like as much clear width as possible, we'll explain how each fitting position affects the space you'll have for the car.
Can I choose the finish and extras on a made-to-measure door?
Yes. Alongside the sizes, you can choose the lath type, a RAL colour or woodgrain finish, vision or vent laths, and for electric doors extras such as a wireless keypad, smart app control or battery backup. Each choice is written into your quote with its price, so the door that's ordered matches exactly what you agreed.
Other roller door services in Brentwood
Made-to-measure roller garage doors in Brentwood
See a guide price in four steps, then book a free survey.
