Call 0800 088 6248

Sizes, finishes and features · CM12

Made-to-measure roller garage doors in Billericay

For a made-to-measure roller door in Billericay, start with four measurements: width, height, headroom and side room. They give you a guide price online, and a free survey in Essex turns them into exact order sizes.

Guide price
from £1,495 inc VAT
First step
Free survey
Covers
Billericay, CM12 and CM11
Area
Essex
Surveyor measuring the width of an empty garage opening with a tape measureComputer-generated image

What should I know about made-to-measure roller garage doors in Billericay?

  • Have your rough measurements to hand when you request a guide price, even though the door is built to the survey sizes.
  • Note any piers, downpipes or meter boxes outside the opening that could affect a face-fixed door or box.
  • Measure from the underside of the lintel to the ceiling or lowest obstruction, as that space decides the size and position of the box.
  • Look for pipes, cables or lights near the top of the opening inside, because they may need moving to make room for the box.

How does it work in Billericay?

Enter your rough measurements in the online quote tool to see a guide price for your width band. That figure already covers fitting and disposal of the door you're replacing.

  1. STEP 01

    Guide price

    Answer four quick questions online and see a price range for your opening.

  2. STEP 02

    Free survey

    We measure the opening, headroom, side room, lintel and power, and talk through options.

  3. STEP 03

    Written quote

    You get the price inc VAT, what is included and the payment stages in writing.

  4. STEP 04

    Fitting day

    Old door out, new door in, commissioned and handed over with the paperwork.

How much do made-to-measure roller garage doors cost in Billericay?

ItemGuide price (inc VAT)Ex VAT
Insulated electric roller door, single up to 2.4 m£1,495–£2,295£1,245.83–£1,912.50 + VAT
Insulated electric roller door, double 3.0–4.0 m£2,195–£3,295£1,829.17–£2,745.83 + VAT

Guide prices for homes, last reviewed 25 October 2026. Your written quote is the price. See the full price list.

Covering Billericay and nearby

We take enquiries from across Billericay, from CM12 outwards, and confirm every price and date in writing before anything is ordered. For reference, Billericay sits roughly 8 miles from Chelmsford.

We also cover Basildon (4 miles), Wickford (5 miles) and Brentwood (5 miles).

Rules that apply in Billericay

Structural work

Widening the opening, removing a central pier or fitting a new lintel is structural work that needs Building Regulations approval from building control before it starts.

Planning

Replacing a garage door is not usually development that needs planning permission. Check first if your home is listed (listed building consent covers works that affect its character), sits in a conservation area with an Article 4 direction, or is on an estate where planning conditions or covenants control garage doors.

Made-to-measure roller garage doors in Billericay: questions

What do you check at a survey in CM12?

At a survey in CM12 we measure the width and height of the opening, the headroom above it for the roller box, the side room for the guide rails and the floor level. We also look at the lintel and where power can come from for an electric door.

Is the survey in Billericay really free?

Yes. For a new door, a replacement or a conversion, the survey is free and there is no obligation to go ahead. We measure the opening, check the lintel, headroom, side room and power, and send a written quote afterwards.

How much do made-to-measure roller garage doors cost in Billericay?

Our guide price for made-to-measure roller garage doors is from £1,495 inc VAT. The figure for your garage depends on the opening size, the door specification and any extras, and is confirmed in a written quote after a free survey. The guide prices are the same in Billericay as elsewhere we cover.

Can I get a price for Billericay without anyone visiting?

Yes. The guide price tool takes four steps and gives a range for your opening and door type. It is a guide, not a quote: the written quote comes after the survey or once the visit price is agreed.

What if my opening is narrower than a typical garage door?

Narrow openings are fine, because the door is built to your width. Side room is the main thing to check, since each guide rail needs some clear wall beside the opening. If the opening is narrow and you'd like as much clear width as possible, we'll explain how each fitting position affects the space you'll have for the car.

Why might my measurements differ from the surveyor's?

Openings are rarely perfectly square, so width and height often vary by a few millimetres from one point to another. The surveyor measures at several points, checks the floor level and works to the figures the door must fit. Small differences from your own measurements are normal, and the written quote is based on the survey.

Other roller door services in Billericay

Made-to-measure roller garage doors in Billericay

See a guide price in four steps, then book a free survey.

CallGuide price