Call 0800 088 6248

Sizes, finishes and features · E6

Made-to-measure roller garage doors in East Ham

Every roller garage door we fit in East Ham is built to the measurements taken at your free survey. Enter rough sizes online for a guide price, and we'll measure properly in Greater London before anything is ordered.

Guide price
from £1,495 inc VAT
First step
Free survey
Covers
East Ham, E6, E12 and E7
Surveyor measuring the width of an empty garage opening with a tape measureComputer-generated image

What should I know about made-to-measure roller garage doors in East Ham?

  • Measure the width at the top, middle and bottom of the opening, because older garages are often slightly out of square.
  • Note any piers, downpipes or meter boxes outside the opening that could affect a face-fixed door or box.
  • Have your rough measurements to hand when you request a guide price, even though the door is built to the survey sizes.
  • Check the height at both sides and in the middle, since an uneven floor can make one side of the opening taller than the other.

How does it work in East Ham?

When you accept the quote, the door is ordered to those sizes and your fitting date is confirmed in writing. The date depends on installer availability.

  1. STEP 01

    Guide price

    Answer four quick questions online and see a price range for your opening.

  2. STEP 02

    Free survey

    We measure the opening, headroom, side room, lintel and power, and talk through options.

  3. STEP 03

    Written quote

    You get the price inc VAT, what is included and the payment stages in writing.

  4. STEP 04

    Fitting day

    Old door out, new door in, commissioned and handed over with the paperwork.

How much do made-to-measure roller garage doors cost in East Ham?

ItemGuide price (inc VAT)Ex VAT
Insulated electric roller door, single up to 2.4 m£1,495–£2,295£1,245.83–£1,912.50 + VAT
Insulated electric roller door, double 3.0–4.0 m£2,195–£3,295£1,829.17–£2,745.83 + VAT

Guide prices for homes, last reviewed 25 October 2026. Your written quote is the price. See the full price list.

Covering East Ham and nearby

We survey and fit roller garage doors across East Ham, including E6, E12 and E7, as part of our coverage in Greater London. For reference, East Ham sits roughly 8 miles from Westminster.

Nearby, we also take enquiries from Barking, Ilford and Canning Town.

Rules that apply in East Ham

Structural work

Widening the opening, removing a central pier or fitting a new lintel is structural work that needs Building Regulations approval from building control before it starts.

Planning

Replacing a garage door is not usually development that needs planning permission. Check first if your home is listed (listed building consent covers works that affect its character), sits in a conservation area with an Article 4 direction, or is on an estate where planning conditions or covenants control garage doors.

Made-to-measure roller garage doors in East Ham: questions

Do you cover East Ham?

Yes. East Ham is part of the area we cover in Greater London, including E6, E12 and E7. Get a guide price online, then we confirm a survey or visit date in writing. Dates depend on installer and engineer availability.

Can I message you a photo of my garage in East Ham?

Yes. Photos of the opening, the inside of the garage above the door and any existing door help us give a more useful guide price for East Ham. Send them by WhatsApp or mention them in your enquiry, and we will reply in writing.

How much do made-to-measure roller garage doors cost in East Ham?

Our guide price for made-to-measure roller garage doors is from £1,495 inc VAT. The figure for your garage depends on the opening size, the door specification and any extras, and is confirmed in a written quote after a free survey. The guide prices are the same in East Ham as elsewhere we cover.

Is an electric roller door worth it for a garage in East Ham?

That depends on how often you use the garage. An electric door opens from the car with a remote and has safety devices fitted, while a manual door costs less and suits occasional use. We price both for your East Ham garage so you can compare.

Can I order a made-to-measure door without a survey?

We don't order doors from customer measurements alone. The door is built to sizes taken at our free survey, where we also check the lintel, headroom, floor and power. That way, if the door doesn't fit, getting the sizes right is our job, not yours. Your own measurements are still useful for the online guide price before the survey.

Can I choose the finish and extras on a made-to-measure door?

Yes. Alongside the sizes, you can choose the lath type, a RAL colour or woodgrain finish, vision or vent laths, and for electric doors extras such as a wireless keypad, smart app control or battery backup. Each choice is written into your quote with its price, so the door that's ordered matches exactly what you agreed.

Other roller door services in East Ham

Made-to-measure roller garage doors in East Ham

See a guide price in four steps, then book a free survey.

CallGuide price