Sizes, finishes and features · IG1
Made-to-measure roller garage doors in Ilford
Every roller garage door we fit in Ilford is built to the measurements taken at your free survey. Enter rough sizes online for a guide price, and we'll measure properly in Greater London before anything is ordered.
- Guide price
- from £1,495 inc VAT
- First step
- Free survey
- Covers
- Ilford, IG1, IG2 and IG3
- Area
- Greater London
Computer-generated image
What should I know about made-to-measure roller garage doors in Ilford?
- Check the clear wall either side of the opening, since the guide rails typically need around 75 to 100 mm each side.
- Note any piers, downpipes or meter boxes outside the opening that could affect a face-fixed door or box.
- Check the height at both sides and in the middle, since an uneven floor can make one side of the opening taller than the other.
- Measure from the underside of the lintel to the ceiling or lowest obstruction, as that space decides the size and position of the box.
How does it work in Ilford?
Enter your rough measurements in the online quote tool to see a guide price for your width band. That figure already covers fitting and disposal of the door you're replacing.
- STEP 01
Guide price
Answer four quick questions online and see a price range for your opening.
- STEP 02
Free survey
We measure the opening, headroom, side room, lintel and power, and talk through options.
- STEP 03
Written quote
You get the price inc VAT, what is included and the payment stages in writing.
- STEP 04
Fitting day
Old door out, new door in, commissioned and handed over with the paperwork.
How much do made-to-measure roller garage doors cost in Ilford?
| Item | Guide price (inc VAT) | Ex VAT |
|---|---|---|
| Insulated electric roller door, single up to 2.4 m | £1,495–£2,295 | £1,245.83–£1,912.50 + VAT |
| Insulated electric roller door, double 3.0–4.0 m | £2,195–£3,295 | £1,829.17–£2,745.83 + VAT |
Guide prices for homes, last reviewed 25 October 2026. Your written quote is the price. See the full price list.
Covering Ilford and nearby
Our coverage in Greater London includes Ilford and the IG1, IG2 and IG3 postcode districts, so the same guide prices and written quotes apply here. For reference, Ilford sits roughly 10 miles from Westminster.
We also cover East Ham (2 miles), Barking (2 miles) and Becontree (2 miles).
Rules that apply in Ilford
Structural work
Widening the opening, removing a central pier or fitting a new lintel is structural work that needs Building Regulations approval from building control before it starts.
Planning
Replacing a garage door is not usually development that needs planning permission. Check first if your home is listed (listed building consent covers works that affect its character), sits in a conservation area with an Article 4 direction, or is on an estate where planning conditions or covenants control garage doors.
Made-to-measure roller garage doors in Ilford: questions
Do you charge more for Ilford than other towns in Greater London?
No. Guide prices are the same for Ilford as for anywhere else we cover in Greater London. The written quote reflects your opening and the door you choose, not your postcode, apart from islands and remote areas where any travel cost is shown in advance.
Is the survey in Ilford really free?
Yes. For a new door, a replacement or a conversion, the survey is free and there is no obligation to go ahead. We measure the opening, check the lintel, headroom, side room and power, and send a written quote afterwards.
Can I get a price for Ilford without anyone visiting?
Yes. The guide price tool takes four steps and gives a range for your opening and door type. It is a guide, not a quote: the written quote comes after the survey or once the visit price is agreed.
Do I need permission for a new roller garage door in Ilford?
Replacing a garage door is not usually development that needs planning permission in England, and widening the opening needs building control approval. If you live in a listed building, a conservation area or on an estate with covenants or planning conditions, check before ordering.
What if my opening is narrower than a typical garage door?
Narrow openings are fine, because the door is built to your width. Side room is the main thing to check, since each guide rail needs some clear wall beside the opening. If the opening is narrow and you'd like as much clear width as possible, we'll explain how each fitting position affects the space you'll have for the car.
Why might my measurements differ from the surveyor's?
Openings are rarely perfectly square, so width and height often vary by a few millimetres from one point to another. The surveyor measures at several points, checks the floor level and works to the figures the door must fit. Small differences from your own measurements are normal, and the written quote is based on the survey.
Other roller door services in Ilford
Made-to-measure roller garage doors in Ilford
See a guide price in four steps, then book a free survey.
