Sizes, finishes and features · SP10

Made-to-measure roller garage doors in Andover

For a made-to-measure roller door in Andover, start with four measurements: width, height, headroom and side room. They give you a guide price online, and a free survey in Hampshire turns them into exact order sizes.

Get my guide price Call 0800 088 6248

Guide price: from £1,495 inc VAT
First step: Free survey
Covers: Andover, SP10 and SP11
Area: Hampshire

Surveyor measuring the width of an empty garage opening with a tape measure

Computer-generated image

What should I know about made-to-measure roller garage doors in Andover?

Check the height at both sides and in the middle, since an uneven floor can make one side of the opening taller than the other.
Check the clear wall either side of the opening, since the guide rails typically need around 75 to 100 mm each side.
Look for pipes, cables or lights near the top of the opening inside, because they may need moving to make room for the box.
Note any piers, downpipes or meter boxes outside the opening that could affect a face-fixed door or box.

How does it work in Andover?

Enter your rough measurements in the online quote tool to see a guide price for your width band. That figure already covers fitting and disposal of the door you're replacing.

STEP 01
Guide price
Answer four quick questions online and see a price range for your opening.
STEP 02
Free survey
We measure the opening, headroom, side room, lintel and power, and talk through options.
STEP 03
Written quote
You get the price inc VAT, what is included and the payment stages in writing.
STEP 04
Fitting day
Old door out, new door in, commissioned and handed over with the paperwork.

How much do made-to-measure roller garage doors cost in Andover?

Item	Guide price (inc VAT)	Ex VAT
Insulated electric roller door, single up to 2.4 m	£1,495–£2,295	£1,245.83–£1,912.50 + VAT
Insulated electric roller door, double 3.0–4.0 m	£2,195–£3,295	£1,829.17–£2,745.83 + VAT

Guide prices for homes, last reviewed 25 October 2026. Your written quote is the price. See the full price list.

Covering Andover and nearby

We survey and fit roller garage doors across Andover, including SP10 and SP11, as part of our coverage in Hampshire. Andover lies around 13 miles from Winchester.

Nearby, we also take enquiries from Winchester, Basingstoke and Eastleigh.

Rules that apply in Andover

Structural work

Widening the opening, removing a central pier or fitting a new lintel is structural work that needs Building Regulations approval from building control before it starts.

Planning

Replacing a garage door is not usually development that needs planning permission. Check first if your home is listed (listed building consent covers works that affect its character), sits in a conservation area with an Article 4 direction, or is on an estate where planning conditions or covenants control garage doors.

Made-to-measure roller garage doors in Andover: questions

Can I get a price for Andover without anyone visiting?

Yes. The guide price tool takes four steps and gives a range for your opening and door type. It is a guide, not a quote: the written quote comes after the survey or once the visit price is agreed.

Do you charge more for Andover than other towns in Hampshire?

No. Guide prices are the same for Andover as for anywhere else we cover in Hampshire. The written quote reflects your opening and the door you choose, not your postcode, apart from islands and remote areas where any travel cost is shown in advance.

How long does it take to fit a roller garage door in Andover?

Most single domestic roller doors are fitted in a day once the door has been made, including removing the old door. Wider doors, conversions that need building work and jobs where power has to be run can take longer; the quote says what to expect.

Do you cover Andover?

Yes. Andover is part of the area we cover in Hampshire, including SP10 and SP11. Get a guide price online, then we confirm a survey or visit date in writing. Dates depend on installer and engineer availability.

Can I order a made-to-measure door without a survey?

We don't order doors from customer measurements alone. The door is built to sizes taken at our free survey, where we also check the lintel, headroom, floor and power. That way, if the door doesn't fit, getting the sizes right is our job, not yours. Your own measurements are still useful for the online guide price before the survey.

Is a made-to-measure door more expensive than a standard size?

Our prices are set in width bands, and the door within each band is built to your measured sizes. The guide price changes when an opening moves into a wider band, or when it needs work beyond the door itself, such as a new lintel or building out the reveals. That extra work is priced on survey and shown on its own line in your written quote.