Sizes, finishes and features · SP10

Double and wide roller garage doors in Andover

We fit double roller garage doors in Andover and throughout SP10, with insulated, single-skin and steel options for wide openings. Your old door is removed and taken away as part of the price, and every extra is shown in writing.

Get my guide price Call 0800 088 6248

Guide price: from £1,395 inc VAT
First step: Free survey
Covers: Andover, SP10 and SP11
Area: Hampshire

Wide anthracite roller door across a double garage on a stone house at sunset

Computer-generated image

What should I know about double and wide roller garage doors in Andover?

Decide whether one wide door or two single doors suits how you use the garage, especially if there is a central pier.
Look along the lintel for cracks or sagging, because a wide door's box is fixed along its full length.
Check whether the floor slopes or dips across the opening, as a wide bottom rail needs to sit evenly when closed.
Allow extra headroom for a wide door, since larger laths make a bigger roll and need a deeper box.

How does it work in Andover?

A free survey in Andover then checks the width at several points, the lintel, headroom, floor and power. Your written quote lists the door and any structural work separately.

STEP 01
Guide price
Answer four quick questions online and see a price range for your opening.
STEP 02
Free survey
We measure the opening, headroom, side room, lintel and power, and talk through options.
STEP 03
Written quote
You get the price inc VAT, what is included and the payment stages in writing.
STEP 04
Fitting day
Old door out, new door in, commissioned and handed over with the paperwork.

How much do double and wide roller garage doors cost in Andover?

Item	Guide price (inc VAT)	Ex VAT
Manual roller door, double 3.0–4.0 m	£1,395–£1,995	£1,162.50–£1,662.50 + VAT
Electric single-skin roller door, double 3.0–4.0 m	£1,795–£2,595	£1,495.83–£2,162.50 + VAT
Insulated electric roller door, double 3.0–4.0 m	£2,195–£3,295	£1,829.17–£2,745.83 + VAT
Insulated electric roller door, wide double 4.0–5.5 m	£2,595–£3,995	£2,162.50–£3,329.17 + VAT

Guide prices for homes, last reviewed 25 October 2026. Your written quote is the price. See the full price list.

Covering Andover and nearby

We take enquiries from across Andover, from SP10 outwards, and confirm every price and date in writing before anything is ordered. Andover lies around 13 miles from Winchester.

Looking from a neighbouring town? We also cover Winchester (13 miles) and Basingstoke (18 miles).

Rules that apply in Andover

Structural work

Widening the opening, removing a central pier or fitting a new lintel is structural work that needs Building Regulations approval from building control before it starts.

Planning

Replacing a garage door is not usually development that needs planning permission. Check first if your home is listed (listed building consent covers works that affect its character), sits in a conservation area with an Article 4 direction, or is on an estate where planning conditions or covenants control garage doors.

Double and wide roller garage doors in Andover: questions

Is the survey in Andover really free?

Yes. For a new door, a replacement or a conversion, the survey is free and there is no obligation to go ahead. We measure the opening, check the lintel, headroom, side room and power, and send a written quote afterwards.

Can I message you a photo of my garage in Andover?

Yes. Photos of the opening, the inside of the garage above the door and any existing door help us give a more useful guide price for Andover. Send them by WhatsApp or mention them in your enquiry, and we will reply in writing.

Can you remove my old garage door in Andover?

Yes. Every door price includes removing and disposing of an old roller or up-and-over door at your Andover address, along with standard fixings and making good to the reveals. If the frame or lintel needs work, we price it at the survey before you agree.

What do you check at a survey in SP10?

At a survey in SP10 we measure the width and height of the opening, the headroom above it for the roller box, the side room for the guide rails and the floor level. We also look at the lintel and where power can come from for an electric door.

Can I convert a double up-and-over door to a roller door?

Yes. We remove the old door and its frame, or keep the frame if it's sound, then check the lintel and reveals. The box is fitted behind the lintel and the guides to the reveals. Any extra work, such as a new lintel or building out the reveals, is priced on survey and listed separately in your written quote.

Will a roller door give me more width than my double up-and-over door?

Possibly a little. An up-and-over door has a frame and swing-out arms at the sides, and a roller door doesn't, so converting can improve the clear width slightly. The guide rails still need some side room at each end. We measure the clear width you'd get at survey, so you know before ordering.